Pressure Reducing Valves

Product Details:

The 4Matic Automatic Control Valve is a hydraulically operated valve. Pressure Reducing 4Matic  provides steady downstream pressure and allows high flow rates. Standard features ease maintenance and repair and provide the lowest total cost of ownership. The PRV 4Matic pilot assembly allows the main valve to modulate between closed and open for constant downstream pressure and automatically seals shut after reaching the pilot set to prevent possible downstream damage. This Water Pressure reducing valve's internal and external epoxy coating offers corrosion-resistance, and the isolation valves and pressure gauges provide easy, cost-effective maintenance and repairs for the lowest total cost of ownership.

#PressureRegulators

#PressureControlValves

#PressureReducers

#FlowControlValves

#PressureLimitingValves

#PressureReductionValves

#RegulatingPressureValves

#FlowRestrictionValves

#PressureModulationValves

#PilotOperatedRegulatorValve

#BackPressureRegulator

#ReliefValve

#ReducingValve

#PressureReducingRegulator

#PressureReliefRegulator

#DiaphragmControlledRegulator

#SpringLoadedRegulator

#Pilot-ControlledPressureRegulatorValve

#Pilot-OperatedPressureControlValve

#Pilot-ActuatedRegulatingValve

#Pilot-OperatedReliefValve

 

#Pilot-ControlledRegulatorValve

Product Details:

There are two types of 4Matic pressure reducing valves, direct acting and pilot operated. Both use globe or angle style bodies. Valves used on smaller piping diameter units are cast from stainless steel; larger piping diameter units are made from ductile iron or Cast Iron or Cast Steel or Stainless Steel. Direct acting valves, the more popular type of a water pressure reducing valves, consist of Globe-Type bodies with a spring-loaded, heat-resistant diaphragm connected to the outlet of the valve that acts upon a spring. This spring holds a pre-set tension on the valve seat installed with a pressure equalizing mechanism for precise water pressure control.

#PressureRegulators

#PressureControlValves

#PressureReducers

#FlowControlValves

#PressureLimitingValves

#PressureReductionValves

#RegulatingPressureValves

#FlowRestrictionValves

#PressureModulationValves

#PilotOperatedRegulatorValve

#BackPressureRegulator

#ReliefValve

#ReducingValve

#PressureReducingRegulator

#PressureReliefRegulator

#DiaphragmControlledRegulator

#SpringLoadedRegulator

#Pilot-ControlledPressureRegulatorValve

#Pilot-OperatedPressureControlValve

#Pilot-ActuatedRegulatingValve

#Pilot-OperatedReliefValve

 

#Pilot-ControlledRegulatorValve

Product Details:

4Matic make pilot operated pressure reducing valves provide stable pressure control with low pressure rise in applications where a specific pressure is needed for precise operation on functions that require regulated pressures up to 1 bar to 40 bar. Pilot operated reducing valves are designed with several pressure and flow ranges in order to give a higher degree of control with a variety of adjustment style options available. The additional valve stability due to the pilot operation make these valves ideal for functions such as brake releases, dual pressure circuits, pilot pressure control, and downstream pressure control on various types of machinery within the mobile and industrial markets.

Features/Benefits:
• Spool design provides low hysteresis
• Low parasitic loss
• High pressure capable
• Multiple pressure ranges available for more accurate pressure control
• Adjustable and tamperproof versions available
• All external parts zinc plated
• Hardened, precision ground parts for durability
• “D”-Ring seal standard on Winner's Circle
• Low profile adapter for minimal space requirements

Applications:
• Brake release
• Multiple pressure circuits
• Pilot pressure control

The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained relatively steady at the pilot set-point.

The solenoid shut-off / override interrupts the PR function to close off the main valve. The valve is available as either normally open where the solenoid is energized to close the main valve or as normally closed where the solenoid is de-energized to close the main valve.


    Excellent low flow stability
    Fast-acting solenoid override
    Operates as normally open or closed
    Easily and precisely set downstream pressure

pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve.

Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained relatively steady at the pilot set-point.

The surge pilot senses the downstream pressure. If the pressure rises above the pressure reducing pilot setting and reaches the surge pilot setting, the surge pilot opens in order to close the main valve rapidly.

    Excellent low flow stability
    Automatically reduces downstream surges during sudden demand reductions
    Easily and precisely set downstream pressure

Countries:
Kyrgyzstan, Nepal, Bhutan, Laos, Myanmar, Thailand, Vietnam, Spratley, Brunei, Malaysia, Combodia, Singapore, Indonesia, Est Timor, Australia, Niue, Samoa, Wallis and futuna, Fiji, New Caledonia, Samoa, Tokelau, Kiribati, Tuvalu, Solomon, Nauru, Papua New Gunea, Micronesia, Palau, Micronesia, Guam, Marshall, Northern Maniana, Philippines, Taiwan, South Korea, North Korea, Japan, Sri Lanka, Maldives, Afghanistan, Uzbekistan, Tajikistan, Kazakhstan, Mongolia, Russia.
Indonesia, Malaysia, South Africa, Ghana, Nigeria, Senegal, Egypt, Turkey, Benin, Burkina Faso, Cape Verde, Cote d'Ivoire (Ivory Coast), Gambiav, Guinea, Guinea-Bissau, Liberia, Mali, Mauritania, Niger, Saint Helena, Sierra Leone, Sao Tome and Principe
Togo, Algeria, Libya, Morocco, Tunisia, South Sudan, Sudan, Western Sahara (Territory).

Product Details:

1. Size Range : 1/2″ to 4″ Screwed
2. Silent Features

• Valve Body is made by Stainless Steel #316, suitable for fluid, air and oil.
• Larger diaphragm is more sensitive to pressure.
• Pressure Adjusting Range : 0.2 ~ 1.5 Kgf/cm2
• Applied Temperature  : -15 ~ 80 °C
• Valve Body Testing Pressure   : 16 Kgf/cm2
• Maximum Applied Pressure   : 10 Kgf/cm2

There are various designs and types of pressure-regulating valves. The spring-loaded reducer and the pilot-controlled valve are the most common.
Spring-Loaded Pressure-Reducing Valves

The spring-loaded pressure-reducing valve is commonly used in pneumatic systems. It is often referred to as a pressure regulator. The valve simply uses spring pressure against a diaphragm to open the valve. On the bottom of the diaphragm, the outlet pressure of the valve forces the diaphragm upward to shut the valve. When the outlet pressure drops below the set point of the valve, the spring pressure overcomes the outlet pressure and forces the valve stem downward, opening the valve. As the outlet pressure increases, approaching the desired pressure, the pressure under the diaphragm begins to overcome spring pressure, forcing the valve stem upward and closing the valve. You can adjust the downstream pressure by turning the adjusting screw, which varies the spring pressure against the diaphragm. This particular spring-loaded valve will fail in the open position if a diaphragm rupture occurs.
Pilot-Controlled Pressure-Reducing Valves

Pressure Reducing Valves are designed to reduce incoming water or steam pressure to a safer constant predetermined downstream level. Depending on the type of valve, the downstream pressure is established by a pressure adjustment setting on the valve or by an external sensor. Pressure Reducing Valves are utilized in residential, commercial, institutional, and industrial applications.

Automatic control valves are used in commercial and industrial applications to control water flow or pressure. We offer automatic control valves that are used to ensure uninterrupted water service during emergencies, maintain a constant liquid level in tanks, automatically reduce a higher upstream water pressure to a constant downstream pressure, and for other purposes

The risks to drinking water quality from backflow contamination incidents pose a constant threat—whether they’re nuisance, non-health hazards, or serious public health events. Plumbing codes mandate that potable water supplies be protected against backflow at all cross-connections. We offer the largest selection of backflow prevention solutions for any application.

Pressure Reducing Valve
Hydraulic Operated Pressure Reducing Valve
Pressure Reducing Valve Cast iron
Pressure Reducing Valve Low Pressure
Micro Pressure Type Pressure Reducing Valve
Direct Activated Pressure Reducing Valve
Safety Valve
POP Type Safety Valve

Pressure Reducing Valves for Steam
Contents:

    Reducing Steam Pressure

In a steam-using plant, steam is often generated at high pressures and reduced locally to provide heat for each steam user. This is usually done to minimize the diameter of steam distribution piping and enable more cost-efficient steam delivery.
Reducing Steam Pressure.

Additional Information:

• Item Code: 4PORV
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Std
• Port of Dispatch: Any
• Production Capacity: Customized
• Delivery Time: Instant
• Packaging Details: Seaworthy Packing Procedure-Special Tools and Accessories Special tools and accessories for equipment and materials are to be packed in wooden cases separately for each main equipment. The mark ¿¿¿TOOLS¿¿¿ and ¿¿¿ACCESSORY¿¿¿ shall be indicated respectively in red paint on the outside of the inner box and be enclosed inside the package containing the main equipment concerned. The packages must be marked with the same item number as the equipment and materials to which the special tools and accessories belong.

Product Details:

Pressure Reducing Valve
Automatic Control Valves, Pressure Reducing Valves

A Pressure Reducing Valve (PRV) is an Automatic Control Valve designed to reduce a higher unregulated inlet pressure to a constant, reduced downstream (outlet) pressure regardless of variations in demand and/or upstream (inlet) water pressure.
Pilot Operated Pressure Reducing Valves

The throttled position of the main valve is controlled by an adjustable pilot valve operating in conjunction with an orifice (or needle valve). The pilot valve senses the downstream (outlet) pressure and reacts immediately as the outlet pressure increases or decreases with varying demand.

The pilot senses the downstream (outlet) pressure and reacts immediately to add or remove water from the top of the main valve diaphragm assembly, allowing the valve to reposition and throttle as the outlet pressure tends to increase or decrease with varying flow demand. The pilot diaphragm will automatically sense the changes in the flow of the system as it continuously controls the main valve to throttle or to open or close and maintain the desired, preset reduced outlet pressure. The throttling action of the main valve provides the required reduced downstream pressure.
Pressure Reducing with Low Flow Bypass
Pressure Reducing & Check
Pressure Reducing, Back Pressure
Pressure Reducing with Solenoid Over-ride
Pressure Reducing Valve

There are various types of Self Actuating Type Pressure Reducing Va... upon the working Pressures, Flow Rates and Fluids.

Self Acting, Pilot & Piston operated Reducing Valves are more Pressure Reduction of STEAM in all types of industries. The Valve Spring Balance principal. The Downstream Pressure is Sense Diaphragm Which is balanced by the Spring Tension. Increasing sp... Increases Outlet Pressure and Vice Versa.

Special quality Stainless Steel Diaphragm :

    Maintains Constant Outlet pressure, irrespective of change in Upstream pressure.

    High Turn Down Ratio. Full to % ( 10:1 ).

    Very ideal for Low and Medium pressure, Steam, Gas and Air
    Variety of Spring Range For better Down Stream Pressure Control

DESIGN :
   

Self Regulating, Pilot Operated Pressure Reducing Valves

SUITABLE FOR :
Low & Medium Pressure Range
150#,300#
Steam, Air, Gas, Liquid, Petroleum Products and Many More.
Screwed, Flanged End Pressure Reducing Valves

 IBR approved Pressure Reducing Station for Steam, Service and Non-IBR station for Air, Gas & Water Service.
All the Steam Stop Valves, Pressure Reducing Valve, Safety Valve, Strainer and Saperator are manufactured completely in house and tested Individually to achive "Best Quality" and "Performance".
"PRESSURE REDUCING VALVE" is designed to get the maximum flow rate of 200 Kg/Hr. Steam flow to 35 tons/hr.
Sizes Available 1/2"X 3/4" to 10" X 12"

Countries:
Kyrgyzstan, Nepal, Bhutan, Laos, Myanmar, Thailand, Vietnam, Spratley, Brunei, Malaysia, Combodia, Singapore, Indonesia, Est Timor, Australia, Niue, Samoa, Wallis and futuna, Fiji, New Caledonia, Samoa, Tokelau, Kiribati, Tuvalu, Solomon, Nauru, Papua New Gunea, Micronesia, Palau, Micronesia, Guam, Marshall, Northern Maniana, Philippines, Taiwan, South Korea, North Korea, Japan, Sri Lanka, Maldives, Afghanistan, Uzbekistan, Tajikistan, Kazakhstan, Mongolia, Russia.
Indonesia, Malaysia, South Africa, Ghana, Nigeria, Senegal, Egypt, Turkey, Benin, Burkina Faso, Cape Verde, Cote d'Ivoire (Ivory Coast), Gambiav, Guinea, Guinea-Bissau, Liberia, Mali, Mauritania, Niger, Saint Helena, Sierra Leone, Sao Tome and Principe
Togo, Algeria, Libya, Morocco, Tunisia, South Sudan, Sudan, Western Sahara (Territory).

Product Details:

Pressure Flow Control (Modulation) Valve-

• Size Range : 1/2″ to 4″ Screwed / Flangedd
• Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases.
• The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for distribution friction losses. The PFC valve will deliver consistent performance as it has no electrical components and is not affected should the valve chamber be flooded. The valve may be used wherever a standard PRV is installed.
• Reduces pressure when demand is lower resulting in reduced leakage losses and pipe breaks
• Compensates for pressure loss in a long pipeline to deliver virtually constant pressure at all times at a distant point
• Simple to set-up and adjust
• Pressure Management Valve
• Pressure Management Valve is a simple package to save water loss and money. It meets system needs by providing higher pressure when called for 24/7 and reduced pressure to save water leakage (and money) at all other times.
• An orifice with a low pressure drop 1.0 psi, (0.07 Bar) is installed upstream of a standard pressure reducing valve fitted with an extra pressure reducing pilot and a sensitive differential pilot which switches between 2 pressure reducing pilots to suit the system flow demand. High flow demand or fire flow will cause the differential pilot to automatically switch control from the low pressure to the higher pressure pilot. The action is then reversed when flow demand falls below the differential pilot set point valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained relatively steady at the pilot set-point.
• Substantially reduces water loss (non-revenue water) due to leakage
• Decreases downstream pipe bursts and associated repair costs
• Allows constant reliable pressure to users, minimizing over pressure at off peak (flow) periods

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Product Details:

4Matic Design for steam, water and non-corrosive liquid service, 4Matic self-actuated temperature regulators are compact, high-performance units. They operate simply and are therefore suitable for a wide variety of applications. Flexible mounting positions for the sensor, interchangeable capillaries and varied temperature ranges make installation, adjustment and maintenance quick and easy.

Product Details:

pneumatic drum type of control valve.
electric actuator operated drum valve
solenoid operated drum valve
manual drum type of control valve
drum type pressure reducing valve
drum type pressure relief valve
drum type pressure sustaining valve
drum type float valve
extended shaft drum valve
handle operated drum valve
countries:
kyrgyzstan, nepal, bhutan, laos, myanmar, thailand, vietnam, spratley, brunei, malaysia, combodia, singapore, indonesia, est timor, australia, niue, samoa, wallis and futuna, fiji, new caledonia, samoa, tokelau, kiribati, tuvalu, solomon, nauru, papua new gunea, micronesia, palau, micronesia, guam, marshall, northern maniana, philippines, taiwan, south korea, north korea, japan, sri lanka, maldives, afghanistan, uzbekistan, tajikistan, kazakhstan, mongolia, russia.
indonesia, malaysia, south africa, ghana, nigeria, senegal, egypt, turkey, benin, burkina faso, cape verde, cote d'ivoire (ivory coast), gambiav, guinea, guinea-bissau, liberia, mali, mauritania, niger, saint helena, sierra leone, sao tome and principe
togo, algeria, libya, morocco, tunisia, south sudan, sudan, western sahara (territory), jordan, bahrain, iraq, iran, qatar, kuwait, syria, israel, cyprus, lebanon, canada

Product Details:

Specifying Automatic Control Valves is a critical balancing act. On onehand, you must have the utmost confidence not only inthe quality and performance of the valve, but also inthe knowledge and “hands-on” expertise of the man-ufacturer. On the other hand, product reliabilitymust be unquestioned, meeting the exact designparameters specified. System, material, and application considerations arereviewed, so the right control valve is selected for your project. Youcan be confident that Watts ACV and our local Representatives areready and able to assist your design team.With a long history of service in Commercial Plumbing, MunicipalWaterworks, Fire Protection, Irrigation, Aviation Fueling, Marine,Theme Park, Decorative Fountain, Light Industrial, and ReclaimedWater markets, Watts ACV has the expertise and products to meetyour needs. Since the 1960’s, Watts ACV has kept pace with changingmarket requirements, developing and delivering quality AutomaticControl Valves at affordable prices.Our fusion bonded, epoxy coated, ductile iron Automatic ControlValves offer long life and minimal maintenance. And for harsh applica-tions and environments, our Fabricated Stainless Steel Valves providea cost effective solution.Whether your application requires Pressure, Level, Pump, or FlowControl, Watts ACV is your best choice for Selection, Sales, and Service.

The body and cover plus interiorseat and diaphragm/stem assembly, which is the onlymoving part in the main valve.
Variable volume cover chamberA synthetic rubber/nylon diaphragm, of FDA approvedmaterials, is assembled between the valve body andcover. This creates a sealed chamber into which linefluid and pressure is introduced. Varying the amount ofpressure   accurately   positions   the   stem   assembly   toopen, close or modulate the valve as required.Precise alignmentand stable throttlingA cover bearing and integral seat bearing guide thestem   assembly   for   precise   alignment   with   the   seat.Coupled with the quad seal retainer plate, this align-ment assures progressive opening/closing flows, stablethrottling, low friction operation and positive closure.Drip tight sealWatts ACV leads the automatic valve industry by beingthe first to incorporate the dynamic quad seal. The seat,retained   on   3   1/2+   sides,   provides   positive   closurewhile eliminating the need to “bite” into the seal, addingyears to the valve’s life. Each quad seal has two usablesides.

Fused epoxy prolongs lifeThis coating is applied under rigorous preparation andapplication standards. It is non-porous, improving theflow coefficiency of the valve and effectively sealing thecasting from interaction with the controlled liquid. Thecoating   also   protects   the   valve   from   environmentalattack. The finish prevents mineral buildup and rust (amajor factor in control valve failure), simplifies mainte-nance, and prolongs the life of the valve.Multiple function performanceBy varying the control/piping arrangement, the WattsACV   is   able   to   perform   a   diversity   of   functions   andapplications. Multiple functions performed by a singlevalve can result in added system protection and lowercost to the user.Simplified MaintenanceThe main valve and pilot system can be serviced with-out removing the valve from the line.Right valve, Right place, Right timeWatts ACV is committed to providing you with correctfunction   and   material   to   meet   your   applicationrequirements and prides itself with accurate, calculateddelivery schedules.

Product Details:

• The 4Matic Make Pilot Operated Pressure Reducing Valve is designed for applications where the reduction of high inlet pressures to a safe and stable outlet pressure is required. The pilot assembly reacts to changes in downstream pressure allowing the main valve to modulate between the closed and open position ensuring a constant downstream set pressure. Once the downstream pressure reaches the pilot setting, the main valve will seal shut preventing damage downstream. Pressure regulation is not dependent upon flow rate, resulting in minimal pressure loss through the valve.
• Like direct acting pressure reducing valves, these valves are self-powered. Pilot operation provides accurate control under large load change conditions. Available in iron, cast steel and stainless steel in sizes 1/2" to 8".

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Product Details:

Size Range : 1/2″ to 2″ Screwed End

Silent Features

• Valve Body is made by Stainless Steel #316, suitable for fluid, air and oil.
• Larger diaphragm is more sensitive to pressure.
• Pressure Adjusting Range  : 0.02 ~ 0.2 Kgf/cm
• Applied Temperature  : -15 ~ 80 °C
• Valve Body Testing Pressure   : 16 Kgf/cm2
• Maximum Applied Pressure   : 10 Kgf/cm2

• Media also available in Oil Gas and Air.
• Material also available in Aluminium and Bronz.
• The by-pass valve is set 5 psi / 0.35 bar higher than the main valve. Under low flow conditions, the main PR valve closes and the by-pass stays open, controlling the pressure at very low flows without seat chatter.
• The pilot valves sense the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained virtually steady at the pilot set-point.
• In contrast to pressure relief valves, which affect the level of input pressure (i.e. pump pressure) fed into the hydraulic system, pressure reducing valves are used to influence the output pressure of the hydraulic system to a subsystem (e.g. actuator pressure).
• Reducing the input pressure (primary pressure) or maintaining a particular output pressure (secondary pressure) is achieved at a set value which is below the varying pressure occurring in the main hydraulic circuit. It is thus possible to reduce the pressure in one part of the circuit to a lower level than the system pressure.
• The pressure control valve is normally open.
• A hydraulic system can only function  as per requirements - by using valves. Thus, you should always look for the correct type of hydraulic valve to serve your intended purpose. Get advice and suggestions from DTA in order to select the appropriate hydraulic valve, in terms of size and function, that suits your application and your budget.
• Pressure reducing valve is a type of pressure control valve. This type of valve is used to maintain constant reduced pressure in a pipeline where the flow is fluctuating. This type of valve (which is normally open) is used to maintain reduced pressures in specified locations of hydraulic systems. The high incoming pressure is reduced to a constant pressure level to protect the important instrument.
• The principal parts of the reducing valve are the main valve; an upward-seating valve that has a piston on top of its valve stem, an upward-seating auxiliary (or controlling) valve, a controlling diaphragm, and an adjusting spring and screw.

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Additional Information:

• Item Code: 4MDUF
• Production Capacity: Std
• Delivery Time: Std
• Packaging Details: Export worthy suitable for sea or air freight.

Product Details:

Pressure Reducing ValvePressure reducing valves are capable of controlling downstream pressure regardless of the load variations or the upstream pressure. Suitable for process type applications as they are versatile and compact, and an economical solution to pressure reduction issues.The DP series can be applied in many industries such as; steam, air and industrial gases.
#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Additional Information:

• Production Capacity: 50

Product Details:

We are one of the foremost firms of Pressure Relief Valves. Besides, we present this product at nominal rates to our customers.

Additional Information:

• Production Capacity: 30

Product Details:

• Pressure Adjusting Range : 1 ~ 5 kgf/cm2, 4 ~ 9 kgf/cm2, (special order is needed for other range)
• Valve Body Testing Pressure : 24 kgf/cm2
• Maximum Applied Pressure : 16 kgf/cm2
• Pressure needed form fully-closed gate to fully-opened
• Gate 1 kgf/cm2 (1 kgf/cm2 = 14.2 psi)
• Applied Temperature : -15 ~ 80 °C
• Applied Condition : Fluid & Air
• The gate is designed for opening status, which will not fluence the water supply function under unstable inlet pressure condition.
• When the outlet pressure responds directly to the pressure control chamber and the setting pressure, it responds quickly and adjusts the pressure accurately.

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Product Details:

The 4Matic Direct Acting Water Pressure Reducing Valve, commonly used in homes, commercial buildings, and manufacturing plants, operates by automatically reducing water pressure from the supply main. It maintains a constant and functional pressure even when supply pressure fluctuates.
Water enters the valve and is constricted within the valve body. An adjustable spring-loaded diaphragm and disc control the flow through the inner chamber. This ensures a steady water flow at a functional pressure, as long as supply pressure is above the valve's preset pressure.
The valve features an internally pilot and piston operated system, offering accurate regulation across various flow rates. Its design, with a full lift type main valve assembly and Globe-type body, enables high flow rates with accuracy. It's ideal for continuous distribution applications, maintaining constant outlet pressure despite changes in inlet pressure or flow rate. The pilot and main valve assembly work together to provide a secure shut off.
Stainless steel trims make the valve suitable for Steam, Air & Gas applications at low and medium pressure. A removable cap allows for easy adjustment, and the enclosed spring chamber prevents fouling due to atmospheric conditions. The valve can be serviced without removing it from the line. An inlet filter screen prevents pilot valve fouling due to dirt, while a carbon ring minimizes piston seizing.
Safety is crucial. Proper safety gear (safety glasses, safety shoes, hard hat) must be worn. Hammering while pressure is present is prohibited, as is using improper tools. Protection against burn injuries from hot surfaces is essential.
On-site, valves are labeled with maximum pressure ratings that must not be exceeded. Discharge connections should be cleaned and oiled before attaching downstream piping. Welding or heating the valve is not allowed. Regular inspections are vital, and repairs must be done by trained technicians under supervision or returned to the manufacturer.
In summary, the 4Matic Valve effectively reduces water pressure while ensuring safety and constant flow. Its design, internal mechanisms, and safety guidelines contribute to its reliable performance.
#PressureRegulators #PressureControlValves #PressureReducers #FlowControlValves #PressureLimitingValves #PressureReductionValves #RegulatingPressureValves #FlowRestrictionValves #PressureModulationValves #PilotOperatedRegulatorValve #BackPressureRegulator #ReliefValve #ReducingValve #PressureReducingRegulator #PressureReliefRegulator #DiaphragmControlledRegulator #SpringLoadedRegulator #Pilot-ControlledPressureRegulatorValve #Pilot-OperatedPressureControlValve #Pilot-ActuatedRegulatingValve #Pilot-OperatedReliefValve #Pilot-ControlledRegulatorValve

Product Details:

1. Size Range : 1/2″ to 3″ Screwed / Flanged
2. Silent Features

• The gate is designed for opening status, which will not fluence the water supply function under unstable inlet pressure condition.
• When the outlet pressure responds directly to the pressure control chamber and the setting pressure, it responds quickly and adjusts the pressure accurately.
• Pressure Adjusting Range : 1 ~ 5 kgf/cm2, 4 ~ 9 kgf/cm2, (special order is needed for other range)
• Valve Body Testing Pressure : 24 kgf/cm2
• Maximum Applied Pressure : 16 kgf/cm2
• Pressure needed form fully-closed gate to fully-opened
• gate 1 kgf/cm2 (1 kgf/cm2 = 14.2 psi)
• Applied Temperature : -15 ~ 80 °C
• Applied Condition : Fluid & Air

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Product Details:

• 4Matic Offer High Flow Multi Functional Type Pressure Reducing Valves Suitable for Air, Water, Steam, Gas & Oil ect.

  Features

• Smart Design with High Flow Characteristics
• Pressure reducing valve can be installed in water supply, air conditioning and fire control systems to maintain the Constant outlet pressure.
• The pressure reducing valve used a sub-valve (pilot valve) to control the main valve. When the outlet pressure reaches the setting range of pressure reducing pilot valve, the pilot valve will automatically sense the outlet pressure and adjusting the pressure of the back pressure chamber in the main valve, so the valve gate can be opened and consequently maintains the out let pressure.
• The pressure gauge on the pilot valve shows the outlet pressure. When the outlet opens, the valve of the pressure gauge will decrease.

Product Details:

Features and Benefits

• Line pressure driven – Independent operation
• Solenoid controlled
• Low power consumption
• Wide ranges of pressures and voltages
• Normally Open, Normally Closed or Last Position
• In-line serviceable – Easy maintenance
• Double chamber design
• Moderated valve reaction
• Protected diaphragm
• Flexible design – Easy addition of features
• Variety of accessories – Perfect mission matching
• Y or angle, wide body – Minimized pressure loss
• Semi-straight flow – Non-turbulent flow
• Stainless Steel raised seat – Cavitation damage resistant
• Obstacle free, full bore – Uncompromising reliability
• V-Port Throttling Plug – Low flow stability

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

Product Details:

 

• Back pressure regulators work differently than standard, or pressure reducing regulators, and it is important to define the difference.
• Pressure reducing regulators reduce a higher supply pressure at the inlet down to a regulated lower pressure at the outlet (downstream). Back-pressure regulators work the opposite way. They regulate the higher inlet (upstream) pressure by opening up only as much as necessary to hold back the desired pressure at the inlet (upstream).
• Back pressure regulators work just like relief valves, but the emphasis is on steady state pressure control instead of on/off pressure protection.

 

• 4Matic Multi function Type Control Valve with Manual Controller can be used as isolating valve and also for flow controlling application. Special Design Namur style Level Operated Ball Valve mounted on main valve for operation. Its simple Technical and heavy duty design impact a unique stands against other Control Valve. High Flow factor and simple Pilot Control makes its very user friendly.
• Exclusive design having for bigger sizes Municipal Water Supply Boards & cross country Pipe line Projects.
• High Cv Value, with Low Pressure Hammering via smooth operation in Actuator
• Lever Operated Low Torque PTFE Seated Ball Valve for smooth and trouble free operation
• Low Noise & Friction at the time of Controlling.
•  Vertical & Horizontal installation can be done.

#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve

 

Product Details:

The 4Matic Direct Acting Water Pressure Reducing Valve, commonly used in homes, commercial buildings, and manufacturing plants, operates by automatically reducing water pressure from the supply main. It maintains a constant and functional pressure even when supply pressure fluctuates.
Water enters the valve and is constricted within the valve body. An adjustable spring-loaded diaphragm and disc control the flow through the inner chamber. This ensures a steady water flow at a functional pressure, as long as supply pressure is above the valve's preset pressure.
The valve features an internally pilot and piston operated system, offering accurate regulation across various flow rates. Its design, with a full lift type main valve assembly and Globe-type body, enables high flow rates with accuracy. It's ideal for continuous distribution applications, maintaining constant outlet pressure despite changes in inlet pressure or flow rate. The pilot and main valve assembly work together to provide a secure shut off.
Stainless steel trims make the valve suitable for Steam, Air & Gas applications at low and medium pressure. A removable cap allows for easy adjustment, and the enclosed spring chamber prevents fouling due to atmospheric conditions. The valve can be serviced without removing it from the line. An inlet filter screen prevents pilot valve fouling due to dirt, while a carbon ring minimizes piston seizing.
Safety is crucial. Proper safety gear (safety glasses, safety shoes, hard hat) must be worn. Hammering while pressure is present is prohibited, as is using improper tools. Protection against burn injuries from hot surfaces is essential.
On-site, valves are labeled with maximum pressure ratings that must not be exceeded. Discharge connections should be cleaned and oiled before attaching downstream piping. Welding or heating the valve is not allowed. Regular inspections are vital, and repairs must be done by trained technicians under supervision or returned to the manufacturer.
In summary, the 4Matic Valve effectively reduces water pressure while ensuring safety and constant flow. Its design, internal mechanisms, and safety guidelines contribute to its reliable performance.
#PressureRegulators #PressureControlValves #PressureReducers #FlowControlValves #PressureLimitingValves #PressureReductionValves #RegulatingPressureValves #FlowRestrictionValves #PressureModulationValves #PilotOperatedRegulatorValve #BackPressureRegulator #ReliefValve #ReducingValve #PressureReducingRegulator #PressureReliefRegulator #DiaphragmControlledRegulator #SpringLoadedRegulator #Pilot-ControlledPressureRegulatorValve #Pilot-OperatedPressureControlValve #Pilot-ActuatedRegulatingValve #Pilot-OperatedReliefValve #Pilot-ControlledRegulatorValve

Product Details:

Pressure Sustaining Valve with Solenoid Control is a hydraulically operated, diaphragm actuated control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure. The valve opens and shuts off in response to an electric signal.

Product Details:

• Single unit cartridge design ensures a quick and easy installation
• Reduces design complexity and avoids installation error
• Reduced leakage potential and easy maintenance, saving cost
• Supplied pre-insulated further reducing installation time and cost
• Easy temperature adjustment between 40-65^oC with tamperproof cap
• Built-in disinfection function to protect against Legionella
• Dry-fit thermometer – no need to drain the system down
• High flow rate design
• ‘Lift and turn’ mechanism for ease of pressure adjustment

Additional Information:

• Item Code: Balance_4M
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Any
• Production Capacity: Customize
• Delivery Time: Instant
• Packaging Details: Seaworthy Packing Procedure - Assortment Of Package Equipment and /or parts of different item numbers shall not be packed together in the same package. Small goods such as accessories, spare parts for erection and commissioning and special tools shall be packed separately in respective inner boxes with tags or labels attached there being clearly indicating their contents. In case that such accessories, spare parts and special tools is packed in separate boxes/ crates, item no. of main equipment shall be clearly mentioned in Main Shipping Mark of purchaser easy identification.

Product Details:

Size Range : 1/2″ to 3″ Screwed / Flanged

Silent Features

• The gate is designed for opening status, which will not fluence the water supply function under unstable inlet pressure condition.
• When the outlet pressure responds directly to the pressure control chamber and the setting pressure, it responds quickly and adjusts the pressure accurately.

• Pressure Adjusting Range : 1 ~ 5 kgf/cm2, 4 ~ 9 kgf/cm2, (special order is needed for other range)
• Valve Body Testing Pressure : 24 kgf/cm2
• Maximum Applied Pressure : 16 kgf/cm2
• Pressure needed form fully-closed gate to fully-opened
• gate 1 kgf/cm2 (1 kgf/cm2 = 14.2 psi)
• Applied Temperature : -15 ~ 80 °C
• Applied Condition : Fluid & Air

Pressure Reducing Valves:

• Suitable for heavy loads, requiring precise pressure control
• Can be tailor made for low noise, SS, Alloy Steel
• Leakage up to class VI can be provided.
• Modular Construction

Product Details:

Our technicians will install and set your PRV to the pressure for which the sprinkler valves and heads are designed and rated. Adjusted pressure will reduce "misting," allowing droplets of water to form. These droplets will land on your landscape instead of misting into the atmosphere.

·         Your system will be more efficient and the reduced pressure will extend the life
of all the components.

·         Please note that depending on demand, city water pressure can fluctuate in any given area.

Additional Information:

·         Item Code: IRRIFATIONPRV

·         Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

·         Port of Dispatch: AHMEDABAD

·         Production Capacity: 500 /1

·         Delivery Time: DEPEND ON QUONTITY

Additional Information:

• Production Capacity: 20

Product Details:

Product details
Pressure Reducing ValvePressure reducing valves are capable of controlling downstream pressure regardless of the load variations or the upstream pressure. Suitable for process type applications as they are versatile and compact, and an economical solution to pressure reduction issues.The DP series can be applied in many industries such as; steam, air and industrial gases.

#AIRA4MATICMechanicalSteamTraps#AIRA4MATICThermostaticSteamTraps#AIRA4MATICThermodynamicSteamTraps#AIRA4MATICBalancedPressureSteamTraps#AIRA4MATICFloatandThermostaticSteamTraps#AIRA4MATICInvertedBucketSteamTraps#AIRA4MATICDiscSteamTraps#AIRA4MATICSteamTrapMonitoringSystems#AIRA4MATICControlValves#AIRA4MATICSelfActingTemperatureControlSystems#AIRA4MATICPneumaticTemperatureControlSystems#AIRA4MATICSelfActingPressureControlSystems#AIRA4MATICPneumaticPressureControlSystems#AIRA4MATICElectronicControlSystems#AIRA4MATICSafetyValvesandReliefValves#AIRA4MATICPressureReducingValves#AIRA4MATICCondensateRecoveryPumps#AIRA4MATICFlashSteamRecoveryVessels#AIRA4MATICCondensatePots#AIRA4MATICSteamInjectors#AIRA4MATICAirVentsandVacuumBreakers#AIRA4MATICBoilerBlowdownSystems#AIRA4MATICLevelControls#AIRA4MATICSteamBoilers#AIRA4MATICHeatRecoverySystems#AIRA4MATICBoilerWaterTreatmentChemicals#AIRA4MATICFlowmetersandEnergyMonitoring#AIRA4MATICSteamTrappingStations#AIRA4MATICCondensateandHeatRecoverySystems#AIRA4MATICSteamSystemAudits#AIRA4MATICCleanSteamGenerators#AIRA4MATICCleanSteamFilters#AIRA4MATICCleanSteamSeparators#AIRA4MATICCleanSteamPressureReducingValves#AIRA4MATICCleanSteamTraps#AIRA4MATICHumidificationandAirSystems#AIRA4MATICSteamHumidifiers#AIRA4MATICElectricHumidifiers#AIRA4MATICCompressedAirProducts#AIRA4MATICFiltersandDryers#AIRA4MATICHheatExchangers


#PressureRegulators#PressureControlValves#PressureReducers#FlowControlValves#PressureLimitingValves#PressureReductionValves#RegulatingPressureValves#FlowRestrictionValves#PressureModulationValves#PilotOperatedRegulatorValve#BackPressureRegulator#ReliefValve#ReducingValve#PressureReducingRegulator#PressureReliefRegulator#DiaphragmControlledRegulator#SpringLoadedRegulator#Pilot-ControlledPressureRegulatorValve#Pilot-OperatedPressureControlValve#Pilot-ActuatedRegulatingValve#Pilot-OperatedReliefValve#Pilot-ControlledRegulatorValve