4MATIC Ball Valve

Product Details:

The Jacketed Ball Valve (Heating Jacket Ball Valve) with very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. This applies especially to media like bitumen and liquid sulfur.

Additional Information:

• Production Capacity: 1500

Product Details:

4Matic offers a versatile Segmented Ball Valve designed for throttling or on-off applications in various industries including pulp & paper, chemical, power, oil & gas, and mining.

The valve features a characterized ball segment for high range ability with splined stem connection for precise control, maintenance friendly segment-stem assembly, low friction shaft and thrust bearings for longer life, integral actuator mounting pads, and interchangeable seats.

VALVE BODY

·         One piece body design which offers greater rigidity against fluctuating pipe loads.

·         Eliminates the leak path associated with two piece body designs.

·         Available in Flangeless and Flanged Ends.

BALL SEGMENT

·         Carefully designed with characterized V-port to offer range ability in excess of 300:1, ideal for throttling applications in high consistency pulp services or slurry applications.

·         Perfectly ground spherical surface with rounded edges ensure lower operating torques for metal seated valves.

·         Hard coated spherical surface prevents galling.

·         The segment is carefully designed for optimum flow.

·         The seat is supported during higher openings to prevent rocking motion and possible failure of the valve.

BALL – STEM CONNECTION SEAT

·         Close-fit splined connection between stem and the segment offers extra strength with no lost motion or dead band.

·         Perfectly oriented, specially designed shaft pin facilitates self-alignment of the ball segment while simplifying the assembly and disassembly during routine maintenance.

SEAT

·         Available with a metal seat and soft seat.

·         Directs the flow away from the sealing area.

·         Pressure energized seat design offers excellent sealing even at very low differential pressures.

·         Self-aligning seat is independent of external pipe loads and offers excellent sealing even in adverse conditions.

·         Standard metal seat has hard-faced seat surface with Stellite overlay on 316 SS base material.

·         Standard soft seat design uses to maintain exceptional chemical and heat resistance.

·         4Matic provides higher compressive strength, lower co-efficient of friction, superior abrasion and wear resistance, lower permeability, lower porosity, and reduced cold flow.

Ball design

The most common design is the "floating ball design". The ball is suspended in the media and held in place by two sealing rings. Some high-quality valves have a "trunnion ball design". The ball is supported at the top and bottom to reduce the load on the valve seats.

The hole through the ball may have different profiles such as a full bore, reduced bore or V-shaped.

• V-shaped - The hole in the ball or the valve seat has a "V" shaped profile. As a result, the desired flow rate can be controlled more precisely by rotating the ball. By optimizing the profile, a linear flow characteristic can be approached.

Product Details:

Pneumatically actuated 2-way ball valves are a simple solution for many basic on/off applications. They rotate 90 degrees (quarter-turn) from fully open to fully closed. While they typically operate more quickly than valves with an electric actuator.

Additional Information:

• Production Capacity: 30

Product Details:

The flush bottom valve are identical to that of a globe valve and the closing and opening actions are also similar. The shut off is achieved by disk closing against the body seat. 

United Arab Emirates: #UAE, Saudi Arabia: #SaudiArabia, Qatar: #Qatar, Kuwait: #Kuwait, Bahrain: #Bahrain, Oman: #Oman, Yemen: #Yemen, Iraq: #Iraq, Jordan: #Jordan, Lebanon: #Lebanon, Syria: #Syria, Palestine: #Palestine, Egypt: #Egypt, Libya: #Libya, Tunisia: #Tunisia, Algeria: #Algeria, Morocco: #Morocco, Abu Dhabi: #AbuDhabi, Dubai: #Dubai, Sharjah: #Sharjah, Ajman: #Ajman, Umm Al Quwain: #UAQ, Ras Al Khaimah: #RAK, Fujairah: #Fujairah, Afghanistan: #Afghanistan, Iran: #Iran, Israel: #Israel, Turkey: #Turkey

Additional Information:

• Production Capacity: 20

Product Details:

Pneumatic Actuator Operated Extended Shaft ‘Cryogenic’ Application Floating Ball Valve. Extended Shaft ball valve designed for using in the several conditions such as Cryogenic Gas Systems, Nitrogen Injection, Oil Recovery, Air Separation Plants, Steel Plants, Heat Treatment.

Additional Information:

• Production Capacity: 20

Product Details:

wafer ball valves are ideally suited to applications where space is at a premiumprovide plus all the benefits of flanged ball valve while reducing the cost and weight. The valve can be installed between flanges with help of bolts.

Additional Information:

• Production Capacity: 20

Product Details:

Model               4MOKZ / OKY

Body                 WCB / CF8 / CF8M

Size                  1/2" & 4"

Seals                 PTFE

Leakage             Class VI

Temperature      Up to 180°C

Pressure            up to 10 Kg/Cm²

• Media:Air, Water, Oil & Gas

• 4Matic Automation manufactured Pneumatic Actuator Operated 3 Piece Design CE Approved 100MM Extended Shaft 2 Way Ball Valve in Screwed & Flanged 150# with Hollow Ball type PTFE Seals.

Product Details:

We are specialized in offering Pneumatic Aluminium Actuator Operated Pharma Diaphragm ValveTriclover Ends to our customers. Our presented product is extremely used in the market owing to their top features.

Additional Information:

• Production Capacity: 20

Product Details:

V knotch floating ball valve have been used and continue to be used for many control applications such as service involving moderate pressure drop

Additional Information:

• Production Capacity: 20

Product Details:

3 Way ball valve offers diverting and mixing / selection flow patterns and often eliminates the need for two valves. The T - Port / L - Port configuration is available as a 2 Piece design in two in two seat and four seat configuration this is extremely versatile in various configurations and the full port design is easily automated as it comes in and is available with various seat material for various pressure and temperature range.

Additional Information:

• Production Capacity: 10

Product Details:

• On / OFF Indicator
• NAMUR Standard Solenoid Valve in all Standard Coil Voltage (Flame Proof Solenoid Coil – On Request)
• Pneumatic & Electro-Pneumatic valve positioner
• Declutchable Manual Over – Ride
• Limit Switches for On / Off Indication at Panel Board
• Filter + Regulator Combination with Pressure Gauge
• Air Lock Valve

Additional Information:

• Production Capacity: 10

Product Details:

High Pressure Ball Valve is and compact design from bar stock for High Pressure application High Pressure Ball Valves are desig

Additional Information:

• Production Capacity: 50

Product Details:

• Suitable for a variety of applications offering durability & reliability.
• An excellent solution where space is at a premium for flanged ball valves such as on the bottom of tanks or confined spaces, or where significant altering of pipework is not an option
• Available with a Pneumatic or Electric Actuator and range of additional accessories such as switchbox, solenoid, air-filter regulator, 4-20mA Electro Pneumatic Positioner.
• Fully assembled and tested.

Product Details:

• On / OFF Indicator
• NAMUR Standard Solenoid Valve in all Standard Coil Voltage (Flame Proof Solenoid Coil – On Request)
• Pneumatic & Electro-Pneumatic valve positioner
• Declutchable Manual Over – Ride
• Limit Switches for On / Off Indication at Panel Board
• Filter + Regulator Combination with Pressure Gauge
• Air Lock Valve

Additional Information:

• Production Capacity: 20

Product Details:

 Double Flange Fabricated Damper Valve Handle And Gear Operated and much more to various industries located in India as well as international industries. Marck Valves is a large product of .These products are mainly used in many industries.

Additional Information:

• Production Capacity: 10

Product Details:

Pneumatic 3 Piece Design Triclover End Ball Valve in India. 

We are also Exporter Pneumatic Ball Valve to worldwide as per customer requirement.

Additional Information:

• Production Capacity: 20

Product Details:

Ball valve for welding, long version, 3-piece body, pressure class depending on the floating ball

Additional Information:

• Production Capacity: 20

Product Details:

V-Notch Valve
1.1 Introduction to Valves A) The V-notch valve has been designed for the requirements and applications of piping. As flow rate is effectively controlled, it has less cavitation, noise, corrosion, or vibration relatively. B) The most important feature of the V-notch valve is its body that has been prepared in appropriate sizes to meet the requirements of piping. It consists of a V-ball that controls fluid, a body that includes a seat, and an actuator to adjust the valve trim. C) The V-notch valve is designed for easy maintenance.
D) The V-notch valve trim boasts a long life span and has few faults. To use the valve to its full life span, you should install it correctly according to the manual and maintain it according to the prescribed procedures while using it.
1.2 Valve Structure A) There are largely two types of V-notch valve: soft seat and metal seat
1.3 Features of Valve A) As the V-notch valve has a V shape ball structure, it can be used for both control and on/off functions.
2. Storage A) Do not throw, drop, trip or drag V-notch valves when transporting it. B) Keep all parts of the V-notch valve in a well-ventilated place protected from fire, rain and wind. Store the valve at a temperature between - 29°C (-20°F) and 48°C (120°F). The storage area must be protected from flooding. C) Operate the elastomer (O-ring type) of pneumatic actuator at least once every six months to prevent their functional degeneration. Operate it to the full stroke even under general operation conditions at least three times a month.
D) Do not remove the flange cap attached to the flange surface to prevent foreign substances from penetrating into the system until valves are installed on the line. 3. Installation Like any other valves, the V-notch valve must be installed carefully at first according to the following cautions to use it for many years without malfunction. A) Remove the flange cap and check whether there are any foreign substances in the body. If you find foreign substances, remove them before starting installation. B) As cast steel products are processed with rust preventive oil before shipping to prevent corrosion, remove the rust preventive oil from the pipes before installing them on the line. C) Blow off all foreign substances including welding chips in the pipes before starting installation.
E) When assembling the flange-type valve, you should use a specified gasket, and install it in parallel with the other flange. Also, you are recommended to fasten the bolts in several parts in a balanced manner sequentially in diagonal direction.
) Install the valve at right angle to the ground as much as possible. If this is impossible, attach a support to the valve before installing it. (See Fig 3.2 and 3.3) CAUTIONS Avoid horizontal piping if possible because it may adversely affect the function and performance of valves during operation. When moving V-notch valves, you should handle them carefully so that the components and air piping will not be damaged. Otherwise, the electronic and electric parts such as solenoid valve, positioner, and limit switch may get damaged or the valve track may change. Be careful not to damage the surface of valve flange sealing. Apply thermal insulation as needed, but do not apply thermal insulation to the cooling fin and extensions.

Product Details:

Jacketed ball valve are designed jacketed construction for standard bore valves the jacket comes in single piece construction wled together

Additional Information:

• Production Capacity: 20

Product Details:

STAINLESS STEEL Four Way Ball Valves

·  AISI-316
(EN10213 1.4408)(ASTM-A351-CF8M)

·  AISI-304
(EN10213 1.4308)(ASTM-A351-CF8)

CARBON STEEL

· S-20C
(EN10213 1.0619)(ASTM-A216-WCB)

FEATURES:

  Pipe thread in accordance with ANSI B2.1,BS 21 1973, DIN 259/2999, ISO 228

  Anti-static device

  Blow-out proof stem

  1000 WOG(63 BAR)

  L port, T port , X port

  Direct mounting pad ISO 5211

OPTION:

  Locking device

  3-Way ball valve

Product Details:

Pneumatic FEP / PFA Lined Butterfly ValvePFA ( Perfluoroalkyl vinyl ether resin) is inherently provided with thermal stability,Fluorinated Ethylene Propylene (FEP)They are available with Wafer style or Lug style 150# ANSI flange connections. They can be equipped

Additional Information:

• Production Capacity: 20

Product Details:

Metal-seated ball valves incorporate a metal-to-metal seal between the seats and ball of the valve assembly. They are made for the severe service of abrasives, corrosives, high-temperature or high-pressure applications.

Additional Information:

• Production Capacity: 20

Product Details:

A three piece ball valve is preferred wherever regular cleaning is required. The valve body is composed of 3 separate pieces held together by bolts, which can be easily removed for cleaning and servicing. A unique advantage of the 3 piece valve design is that the ball valve ends can remain threaded into the pipe, while the center section containing the ball can be removed. These 3 piece ball valves have been specifically designed to be easily disassembled, cleaned, and reassembled. 3 piece stainless Steel ball valves also called 3 SS ball valves, are widely used for a variety of sanitary applications that are required for pharmaceutical and food/beverage industries.

• Threaded Ports Female by Female NPT for Standard Connection
• Full Port Valve
• Standard with Blow Out Proof Stem
• Pressure Rated to 1000 PSI  Suitable for Standard Applications
• PTFE Seals and Seats Making these Heat and Chemical Resistant
• Sizes available in 1/4" to 4"

Additional Information:

• Production Capacity: 20

Product Details:

• On / OFF Indicator
• NAMUR Standard Solenoid Valve in all Standard Coil Voltage (Flame Proof Solenoid Coil – On Request)
• Pneumatic & Electro-Pneumatic valve positioner
• Declutchable Manual Over – Ride
• Limit Switches for On / Off Indication at Panel Board
• Filter + Regulator Combination with Pressure Gauge
• Air Lock Valve

Additional Information:

• Production Capacity: 10

Product Details:

Pneumatic Rotary Actuator Operated "3, 4 & 5 Way" Design Investment Casting CF8 / CF8M / WCB Floating Ball Valve, engineered for multiple Diverting / Mixing Operations in the down stream. TYPE : "T" . PORT / "L" . PORT / "X" . PORT In Full Bore / Reduce Bore.

Additional Information:

• Production Capacity: 10

Product Details:

butterfly valves are easy to operate and are available in various sizes. These valves can be manually operated or automated, depending on the desired degree of automation.

Additional Information:

• Production Capacity: 10

Product Details:

3 position Pneumatic Rotary Actuator. It provides an operation of 0°, 45°, 90°, or the random travel of the middle position. The middle position is achieved by the mechanical brake. That is caused by the movement of the two auxiliary pistons. This actuator comes with double acting actuation. This three position actuator is suitable for coarse-fine adjustment, typically for batching operations or processes.

Additional Information:

• Production Capacity: 30