Ball Valves

Product Details:

This range offers reliable option for the high pressure application. These valves are recommended for the use in Oil, Gas, and Petrochemicals where the long life is required.

Product Details:

The ball valve, along with butterfly and plug valves, is part of the quarter-turn valve family. Ball valves are known for reliable, bubble-tight sealing. Thus, they are a great choice for gas applications where tight shutoff is necessary. Due to the potential of constant wearing on the seats, ball valves are not ideal for throttling applications. The body of a ball valve usually is made of steel and can be made more durable with nickel plating.
The most common ball valves are considered to be two-way, which allows flow to travel linearly from the inlet to the exit. Furthermore, the three-way and four-way ball valves allow for flow to travel in multiple directions, including 90-degree angles.
There are four general body styles of ball valves: fully welded, three-piece body (also called side or end-entry), split-body, and top-entry. The difference is based on how the pieces of the valve are manufactured and assembled, but the valve operation is the same in each type. Each design has its benefits.

The trunnion mounted stem absorbs the thrust from the line pressure, preventing excess friction between the ball and seats, so even at full rated working pressure operating torque remains low.
Floating Ball Valve– A floating ball valve is not held in place by a trunnion, and instead is attached only to the stem. This sometimes causes the ball to float slightly downstream. However, when this happens, the ball presses against the seat, creating a positive seal.
Rising Stem Ball Valve– A rising stem ball valve incorporates tilt-and-turn operation, eliminating seal rubbing which is one of the primary causes of valve failure. When the valve is closed, the core is wedged against the seat, ensuring positive shutoff. When the valve is open, the core tilts away from the seal and the flow passes uniformly around the core face.     Additionally, the valve is able to eliminate localized high- velocity flow that typically creates uneven seat wear exhibited by ordinary ball, gate, and plug valves.

Additionally, there are three basic types of bores for ball valves: full port, reduced port (also known as standard port), and v-port. These four types have different constructions and purposes.

Full-Port Ball Valve – A full-port, also known as a full-bore, ball valve has a bore internal diameter (ID) approximately equal to the pipeline ID. This allows for reduced friction and pressure loss across the valve. With a full-port ball valve there is no restriction to the flow of fluid, but the valve can be more expensive. This type of bore is ideal for situations where pigging may be necessary. The 4matic series split-body, full-port, flanged ball valve combines its sealing technology and design expertise with the versatility to solve even the most demanding applications. This technology is widely used in the chemical, petrochemical, and refining industries.


Reduced-Port Ball Valve – A reduced-port, also known as a reduced-bore, ball valve is a valve in which the bore is reduced to one or two nominal sizes lower. This provides a more restricted flow path, generally resulting in higher energy losses. ball valves offer both full- port and reduced-port valves. Known for its robust design, superior sealing areas and stainless steel overlays, the TK brand is widely recognized as the leader in providing valve solutions for the oil and gas industries'' most severe service applications.
V-Port Ball Valve – A v-port ball valve has either a “v” shaped ball or a “v” shaped seat. This type of valve also is known as a control valve in which the flow velocities need to be controlled as required per the application.

Product Details:

STAINLESS STEEL Four Way Ball Valves

·  AISI-316
(EN10213 1.4408)(ASTM-A351-CF8M)

·  AISI-304
(EN10213 1.4308)(ASTM-A351-CF8)

CARBON STEEL

· S-20C
(EN10213 1.0619)(ASTM-A216-WCB)

FEATURES:

  Pipe thread in accordance with ANSI B2.1,BS 21 1973, DIN 259/2999, ISO 228

  Anti-static device

  Blow-out proof stem

  1000 WOG(63 BAR)

  L port, T port , X port

  Direct mounting pad ISO 5211

OPTION:

  Locking device

  3-Way ball valve

Product Details:

• Size available from 15mm to 200mm.
• Ball ValvesA ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked. They are characterized by a long service life and provide a reliable sealing over the life span, even when the valve is not in use for a long time. As a result, they are more popular as a shut-off valve then for example the gate valve. Moreover, they are more resistant against contaminated media than most other types of valves. In special versions, ball valves are also used as a control valve. This application is less common due to the relatively limited accuracy of controlling the flow rate in comparison with other types of control valves. However, the ball valve also offers some advantages here. For example, the valve still ensures a reliable sealing, even in the case of dirty media.Circuit function
• The valve may have two, three or even four ports (2-way, 3-way or 4-way). The vast majority of ball valves are 2-way and manually operated with a lever. The lever is in line with pipe when the valve is opened. In closed position, the handle is perpendicular to the pipe. Manually operated ball valves can be quickly closed and therefore there is a risk of water hammer with fast-flowing media. Some ball valves are fitted with a transmission. The 3-way valves have an L-shaped or T-shaped bore. As a result, various circuit functions can be achieved such as distributing or mixing flows. In the image below, the circuit functions 3-way ball valves are shown schematically.

Product Details:

Size also available from 8mm to 50mm.

4Matic offers Hand Lever Operated Low Torque High Pressure Ball Valve. Locking arrangment & Actuator Mounting Pad.

Details:

• 4Matic offers hand lever operated low torque high pressure ball valve.
• Locking arrangement & actuator mounting pad.

Product Details:

Size available from 50mm to 200mm.

4Matic Hand Lever & Gear Operated Metal Seated Ball Valve Designed for Using in the severe conditions such as high temperature.

Details:

• 4Matic hand lever & gear operated metal seated ball valve designed for using in the severe conditions such as high temperature.

Housing 

• The assembly of the valve housing can be divided in three commonly used designs: one-piece, two-piece and three-piece housings. The difference is how the valve is assembled and this affects the possibilities for maintenance or repair. The operation of thevalves is the same in each embodiment.
• One-piece - This is the cheapest variant. The two parts which enclose the ball are pressed or welded. The valves can not be opened for cleaning or maintenance. This type is generally used for low-demanding applications.
• Two-piece - Two-piece valves can be disassembled for cleaning, servicing and inspection. Often, the parts are connected via a threaded connection. The valve must be completely removed from the pipe in order to separate the two parts.
• Three-piece - More expensive valves have often three pieces. The parts are generally clamped together by bolt connections. The advantage of this embodiment is that the valve can be serviced without removing the entire valve from the pipeline.

Product Details:

4Matic offers a versatile Segmented Ball Valve designed for throttling or on-off applications in various industries including pulp & paper, chemical, power, oil & gas, and mining.

The valve features a characterized ball segment for high range ability with splined stem connection for precise control, maintenance friendly segment-stem assembly, low friction shaft and thrust bearings for longer life, integral actuator mounting pads, and interchangeable seats.

VALVE BODY

·         One piece body design which offers greater rigidity against fluctuating pipe loads.

·         Eliminates the leak path associated with two piece body designs.

·         Available in Flangeless and Flanged Ends.

BALL SEGMENT

·         Carefully designed with characterized V-port to offer range ability in excess of 300:1, ideal for throttling applications in high consistency pulp services or slurry applications.

·         Perfectly ground spherical surface with rounded edges ensure lower operating torques for metal seated valves.

·         Hard coated spherical surface prevents galling.

·         The segment is carefully designed for optimum flow.

·         The seat is supported during higher openings to prevent rocking motion and possible failure of the valve.

BALL – STEM CONNECTION SEAT

·         Close-fit splined connection between stem and the segment offers extra strength with no lost motion or dead band.

·         Perfectly oriented, specially designed shaft pin facilitates self-alignment of the ball segment while simplifying the assembly and disassembly during routine maintenance.

SEAT

·         Available with a metal seat and soft seat.

·         Directs the flow away from the sealing area.

·         Pressure energized seat design offers excellent sealing even at very low differential pressures.

·         Self-aligning seat is independent of external pipe loads and offers excellent sealing even in adverse conditions.

·         Standard metal seat has hard-faced seat surface with Stellite overlay on 316 SS base material.

·         Standard soft seat design uses to maintain exceptional chemical and heat resistance.

·         4Matic provides higher compressive strength, lower co-efficient of friction, superior abrasion and wear resistance, lower permeability, lower porosity, and reduced cold flow.

Ball design

The most common design is the "floating ball design". The ball is suspended in the media and held in place by two sealing rings. Some high-quality valves have a "trunnion ball design". The ball is supported at the top and bottom to reduce the load on the valve seats.

The hole through the ball may have different profiles such as a full bore, reduced bore or V-shaped.

• V-shaped - The hole in the ball or the valve seat has a "V" shaped profile. As a result, the desired flow rate can be controlled more precisely by rotating the ball. By optimizing the profile, a linear flow characteristic can be approached.

Product Details:

Body Materials: Stainless Steel, Carbon Steel, Alloys

Seat Materials: Standard

Optional: PEEK, RPTFE, Metal, Cavity

APPLICATIONS: Process, Tank Farms, Fueling, Oil & Gas

Housing materials

• The most common housing materials for ball valves are brass, stainless steel and PVC. The ball is usually made of chrome plated steel, chrome plated brass, stainless steel or PVC. The seats are often made of Teflon, but could also be made of other synthetic materials or metals. More information on this topic you can find on the page: Chemical resistance of materials.

Stainless Steel

• Stainless steel ball valves are used for corrosive media and aggressive environments. They are therefore often used in seawater, swimming pools, osmosis installations, with high temperatures, and many chemicals. Most stainless steel is austenitic. Type 304 and 316 are the most common, 316 has the best corrosion resistance. 304 is sometimes referred to as 18/8 because of 18% chromium and 8% nickel. 316 has 18% chromium and 10% nickel (18/10). Stainless steel valves usually require a higher operating torque  than for example brass or PVC valves. This must be taken into account when a stainless steel valve is operated by an electric or pneumatic actuator.

PVC (PolyVinyl Chloride)

• PVC ball valves often have a lower price (except for ISO-top valves) and are widely used in irrigation, water supply and drainage or corrosive media. PVC stands for polyvinyl chloride. PVC is resistant to the most of the salt solutions, acids, bases, and organic solvents. PVC not suitable for temperatures higher than 60 °C, and is also not resistant to aromatic and chlorinated hydrocarbons. PVC is not as strong as brass or stainless steel, therefore PVC ball valves have lower pressure rating.

Seals and O-rings

• Most valve seats are made of PTFE (Teflon). PTFE stands for PolyTetraFluorEthylene. This material has a very good chemical resistance and a high melting point (~327°C). Besides that, the friction coefficient is extremely low. A small disadvantage of PTFE is that the material shows creep, which can cause a deterioration of the sealing over time. Besides that, PTFE has a rather high thermal expansion coefficient. A solution for this problem is to use a spring in order to apply a constant pressure on the Teflon seal, like for example a cup spring. Other popular sealing materials are enforced PTFE and Polyamide (Nylon). The harder the material of the valve seat is, the more difficult it is to maintain proper sealing. For some application in which soft materials are not possible to use, for example with very high temperatures, metal or ceramic valve seats are used.

Countries:

Kyrgyzstan, Nepal, Bhutan, Laos, Myanmar, Thailand, Vietnam, Spratley, Brunei, Malaysia, Combodia, Singapore, Indonesia, Est Timor, Australia, Niue, Samoa, Wallis and futuna, Fiji, New Caledonia, Samoa, Tokelau, Kiribati, Tuvalu, Solomon, Nauru, Papua New Gunea, Micronesia, Palau, Micronesia, Guam, Marshall, Northern Maniana, Philippines, Taiwan, South Korea, North Korea, Japan, Sri Lanka, Maldives, Afghanistan, Uzbekistan, Tajikistan, Kazakhstan, Mongolia, Russia.
Indonesia, Malaysia, South Africa, Ghana, Nigeria, Senegal, Egypt, Turkey, Benin, Burkina Faso, Cape Verde, Cote d''Ivoire (Ivory Coast), Gambiav, Guinea, Guinea-Bissau, Liberia, Mali, Mauritania, Niger, Saint Helena, Sierra Leone, Sao Tome and Principe
Togo, Algeria, Libya, Morocco, Tunisia, South Sudan, Sudan, Western Sahara (Territory).

Product Details:

SPECIFICATIONS

PORTS: Full Port

BODY STYLE: Three Piece

SIZE RANGE: 1/4" - 4" (8mm - 100mm)

TEMPERATURE RANGE: -50°F to 450°F (-46°C to 232°C)

PRESSURE RATINGS: 1/4" - 2" 1000 psi CWP (69 Bar)

SIZE: 2-1/2" - 4" 800 psi CWP (55 Bar)

END CONNECTIONS: Threaded, Socket Weld

BODY MATERIALS: Stainless Steel & Carbon Steel

SEAT MATERIALS: RPTFE

APPLICATIONS: Process, OEM Equipment

Additional Information:

• Item Code: 4MOKS
• Production Capacity: 8976
• Delivery Time: ASAP
• Packaging Details: Std

Product Details:

• 4Matic Wafer Ball Valves Save Space, Save Weight and Save Cost over. Flanged Split Body Ball Valves.  Wafer Ball Valves are available in Carbon Steel and Stainless Steel.  Wafer Ball Valves can have Lever Handles Gear Operators, Air Actuators or Electric Actuators.  Sizes from 1/2" to 8".

Additional Information:

• Item Code: 4MWBLV
• Production Capacity: 8989
• Delivery Time: ASAP
• Packaging Details: Std

Product Details:

V-Notch Valve
1.1 Introduction to Valves A) The V-notch valve has been designed for the requirements and applications of piping. As flow rate is effectively controlled, it has less cavitation, noise, corrosion, or vibration relatively. B) The most important feature of the V-notch valve is its body that has been prepared in appropriate sizes to meet the requirements of piping. It consists of a V-ball that controls fluid, a body that includes a seat, and an actuator to adjust the valve trim. C) The V-notch valve is designed for easy maintenance.
D) The V-notch valve trim boasts a long life span and has few faults. To use the valve to its full life span, you should install it correctly according to the manual and maintain it according to the prescribed procedures while using it.
1.2 Valve Structure A) There are largely two types of V-notch valve: soft seat and metal seat
1.3 Features of Valve A) As the V-notch valve has a V shape ball structure, it can be used for both control and on/off functions.
2. Storage A) Do not throw, drop, trip or drag V-notch valves when transporting it. B) Keep all parts of the V-notch valve in a well-ventilated place protected from fire, rain and wind. Store the valve at a temperature between - 29°C (-20°F) and 48°C (120°F). The storage area must be protected from flooding. C) Operate the elastomer (O-ring type) of pneumatic actuator at least once every six months to prevent their functional degeneration. Operate it to the full stroke even under general operation conditions at least three times a month.
D) Do not remove the flange cap attached to the flange surface to prevent foreign substances from penetrating into the system until valves are installed on the line. 3. Installation Like any other valves, the V-notch valve must be installed carefully at first according to the following cautions to use it for many years without malfunction. A) Remove the flange cap and check whether there are any foreign substances in the body. If you find foreign substances, remove them before starting installation. B) As cast steel products are processed with rust preventive oil before shipping to prevent corrosion, remove the rust preventive oil from the pipes before installing them on the line. C) Blow off all foreign substances including welding chips in the pipes before starting installation.
E) When assembling the flange-type valve, you should use a specified gasket, and install it in parallel with the other flange. Also, you are recommended to fasten the bolts in several parts in a balanced manner sequentially in diagonal direction.
) Install the valve at right angle to the ground as much as possible. If this is impossible, attach a support to the valve before installing it. (See Fig 3.2 and 3.3) CAUTIONS Avoid horizontal piping if possible because it may adversely affect the function and performance of valves during operation. When moving V-notch valves, you should handle them carefully so that the components and air piping will not be damaged. Otherwise, the electronic and electric parts such as solenoid valve, positioner, and limit switch may get damaged or the valve track may change. Be careful not to damage the surface of valve flange sealing. Apply thermal insulation as needed, but do not apply thermal insulation to the cooling fin and extensions.

Product Details:

• Size available from 1/2 inch to 4 inch.
• 4Matic is a manufacturer, exporter, and supplier of V Notch Ball Valve. V-Notch Ball valves are specially used to control the flow rate in pipelines because it has V-Notch inside the valve body. V Notch Ball Valve characterized V ball which is perfectly suited to give a full range of control applications with superior flow control. In small sizes, these control ball valves when compared to globe valves are more compact, lighter in weight, and much less expensive.
• The V-Notch Ball Valve is also known as V Port Ball Valve and it can sustain up to 10Kg/Cm² pressure & temperature up to 180°C. We use PTFE seals, WCB/CF8/CF8M/CF3M materials used to make the Body, and CF8/CF8M/CF3M to make the Ball. Stainless Steel 304 has been used for the Gland plate, Gland L.N. Bolt, Trunnion pin, and bracket fitting bolts. For the Shaft and retainer, we use S.S. 304/S.S. 316. It has a class VI leakage type. It is available in 1” to 4” inches & has flanged ends 150# to 300#.
• The 90 and 60 balls, like standard round hole balls, offer an equal percentage inherent flow characteristic. Medium angle V-Port 30 balls furnish a modified equal percentage inherent flow 

Model               4MVBP

Size                  1" to 12"

Seals                 PTFE

Leakage             Class VI

Temperature      up to 180°C

Pressure            up to 10 Kg/Cm²

Media               Air, Water, Oil & Gas

Ends                 Flanged 150# / 300#characteristic.

 

 

Product Details:

 

Product Details:

Floating Ball Valve
Standard Ball Valves
Extended Neck Floating Ball Valves
Jacketed Floating Ball Valves
Zero Cavity Floating Ball Valve
Triclover Floating Ball Valve
Tank Flush Bottom Floating Ball Valve
Zero Dead Line Floating Ball Valve
High Pressure Floating Ball Valve
3 Way 3 Piece Floating Ball Valve
pneumatic actuated ball valves
pneumatically controlled ball valves, which are used to control the flow of liquids and gases remotely. The actuator will open and close the ball valve with compressed air (single acting uses a spring to either open or close the valve). The ball valve has a hole through one side to allow flow when turned appropriately. The ball valve can be 2-way or 3-way and offers good sealing properties. Pneumatic actuators are a reliable solution and often used to control larger valves than electric actuators at a lower investment cost. There are various housings and sizes of pneumatically controlled ball valves to allow you to find the right one for your application.
Pneumatic Rotary Actuator Operated 3 Piece Design Ball Valve
AIRA 4MATIC GLOBAL VALVE AUTOMATION PVT. LTD. the Brand of Pneumatic Actuator Operated Ball Valve Manufacturer & Supplier in India. We have a wide range of Pneumatic Ball Valve for Water, Gas, Air & Oil Applications. This Valve we Designed 3 (Three) Piece Floating which has Standard Design, Valve Face to Face Dimension, Leakage Class and other useful Specifications.

We make Our Pneumatic Ball Valve in ½” to 14” with three end connection Screwed End, Flanged End, and Socket Weld so complete solution for Industry and Users. AIRA 4MATIC GLOBAL VALVE AUTOMATION PVT. LTD. design and manufacture a range of high integrity instrumentation Pneumatic Ball valves for worldwide applications, yes we supply worldwide as per customer requirement and their drawing.

So are you looking for Quality Pneumatic Ball Valve Manufacturer in India so you are on right company.  Just send your inquiry to get full detail and price of a pneumatic ball valve.

Accessories which you can use with this Ball Valve:

    On/off Indicator
    Namur Standard Solenoid Valve in all Standard
    Pneumatic & Electro-Pneumatic Valve Positioner
    Declutchable Manual Override
    Limit Switches for On/Off Indication at Panel Board
    Filter + Regulator Combination with Pressure Gauge
    Air Lock Valve

V - Knotch Ball Valve
High Pressure 200 Kg Ball Valve
Triclover Ends 2 Way Ball Valve
3 Piece Extended Shaft Ball Valve
Pneumatic Actuator But Weld Ball Valve
Pneumatic 3 Piece Ball Valve
Pneumatic 3 Piece Metal Seated Ball Valve
Pneumatic Actuator OKM Ball Valve
Pneumatic 2 Piece Design Ball Valve
Polypropylene Ball Valve
Flush Bottom Ball Valve
High Pressure Ball Valve
Wafer Type Ball Valve
Jacketed Ball Valve
FEP / PFA Lined Ball Valve
UPVC Ball Valve
Trunnion Mounted Ball Valve
"C" Way Ball Valve
3 Way / 4 Way / 5 Way Ball Valve
3 Way / 4 Way Ball Valve

2/2 or 3/2 way Ball Valve, 2 Piece

    Stainless steel ball valve
    High flow rate
    High medium pressure
    Long life
    ISO 5211 Top flange

2/2 way Ball Valve with Pneumatic Rotary Actuator

    2- or 3-piece ball valve
    Pneumatic actuator
    Compact design
    Visual position indicator
    Pilot valve connection NAMUR

2/2 way ball valve 3 piece   Stainless steel ball valve
    High flow values

Additional Information:

• Item Code: 4MBLVACT
• Production Capacity: 12213
• Delivery Time: ASAP
• Packaging Details: Std

Product Details:

The Jackets assure consistent valve Heating or Cooling of the process media to prevent crystallization or seizing of flow media. The Jacketed Ball Valve with very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. This applies especially to media like bitumen and liquid sulfur. In addition, the efficient flow of media is ensured through the elimination of pockets.

Product Details:

• Sizde available from 15mm to 200mm
• 4Matic make UPVC ball valves with electric actuators find strong acceptance in applications that require automation capabilities. The actuator body is suitable for use in both indoor and outdoor conditions. The valve position can be adjusted from 15 degree to 90 degree as per application requirement. Assembly of actuators and valves meets EN ISO 5211 standards. Complete performance testing is conducted before the valves are dispatched. Electric actuated ball valves are available in On-Off Type and Modulating Type.

 

DESCRIPTION:

1.Material: PVC, UPVC CPVC, PP, PVDF

2.Size: 1/2' - 4'; 20mm - 110mm; DN15 - DN100

3.Standard: ANSI, DIN, JIS

4.Joint End: Socket, Threaded(NPT, PT, BSPF), Fusion, Welding

5.Working Pressure: 150 PSI

6.Operating Temperature: PVC(0~55???); CPVC and PP(0~95???)

7.>Valve body color : PVC(dark gray), CPVC(light gray), PP(light yellow), PVDF(ivory)

Product Details:

Model               4MOKZ / OKY

Body                 WCB / CF8 / CF8M

Size                  1/2" & 4"

Seals                 PTFE

Leakage             Class VI

Temperature      Up to 180°C

Pressure            up to 10 Kg/Cm²

• Media:Air, Water, Oil & Gas

• 4Matic Automation manufactured Pneumatic Actuator Operated 3 Piece Design CE Approved 100MM Extended Shaft 2 Way Ball Valve in Screwed & Flanged 150# with Hollow Ball type PTFE Seals.

Product Details:

three way ball valve

Our Three Way Ball Valve is used for applications where line diverting or mixing applications are essential. Three Way Valve divert flow from one hole to three holes. These ball valves have high durability, anti corrosive, leak proof, high performance, maximum output, and minimum maintenance
Offering you a complete choice of products which include pvc three way ball valve, pp three way valves, plastic three way ball valve and three way ball valve.
Our Three Way Ball Valve is used for applications where line diverting or mixing applications are essential. Three Way Valve divert flow from one hole to three holes. These ball valves have high durability, anti corrosive, leak proof, high performance, maximum output, and minimum maintenance.
Our competency lies in offering our clients an excellent quality range of pvc three way ball valve. Designed using the finest quality polypropylene and innovative technologies, this three-way ball valve is available in various pipe ends like screwed, socket weld and butt weld. Used in air venting or air admission services in water pipelines, this three-way ball valve is strictly tested on variegated parameters.
3 Way PVC-U Ball Valve - L or T Port
Economy PVC-U Double Union Ball Valve
WRAS Approved ABS Double Union Ball Valve
WRAS Approved PVC Double Union Ball Valve
PVC-U Economy Single Union Ball Valve
    Actuation
    Air Valves
    Ball Valves
    Butterfly Valves
    Check Valves
    Control Valves
    Custom Built Items
    Diaphragm Valves
    Dismantling Joints
    Dorot Control Valves & Dorot Air Valves
    Extensions
    Float Valves
    Gate Valves
    Globe Valves
    Knife Gate Valves
    Needle Valves
    Pilot Controlled Valves
    Solenoid Valves
    Strainers Y Type
    Vibration Eliminators
    Water Meters
Pneumatic Rotary Actuator Operated UPVC Ball Valve
   
Model: U2B / U3B
Body: UPVC / EP
Size Range: 1/2" to 4" for 2 way | 1/2" to 5" for 3 way
Ball: UPVC / EP
Seat: PTFE / EPDM / VITON
Temprature: 80°C Max.
Pressure: 7 BAR
End Connection: Screwed End
Countries:
Kyrgyzstan, Nepal, Bhutan, Laos, Myanmar, Thailand, Vietnam, Spratley, Brunei, Malaysia, Combodia, Singapore, Indonesia, Est Timor, Australia, Niue, Samoa, Wallis and futuna, Fiji, New Caledonia, Samoa, Tokelau, Kiribati, Tuvalu, Solomon, Nauru, Papua New Gunea, Micronesia, Palau, Micronesia, Guam, Marshall, Northern Maniana, Philippines, Taiwan, South Korea, North Korea, Japan, Sri Lanka, Maldives, Afghanistan, Uzbekistan, Tajikistan, Kazakhstan, Mongolia, Russia.
Indonesia, Malaysia, South Africa, Ghana, Nigeria, Senegal, Egypt, Turkey, Benin, Burkina Faso, Cape Verde, Cote d''Ivoire (Ivory Coast), Gambiav, Guinea, Guinea-Bissau, Liberia, Mali, Mauritania, Niger, Saint Helena, Sierra Leone, Sao Tome and Principe
Togo, Algeria, Libya, Morocco, Tunisia, South Sudan, Sudan, Western Sahara (Territory).

Additional Information:

• Item Code: 4MUPVCBLV
• Production Capacity: 9876
• Delivery Time: ASAP
• Packaging Details: Std