Industrial Valves

Product Details:

We are the leading manufacturers, suppliers and exporters of wide range of Check Valve that is a mechanical device, a valve that normally allows fluid (liquid/gas) to flow through it in only one direction. Further, these are fabricated from superior quality raw material that is procured from the reliable vendors of the industries. Although they are available in a wide range of sizes and costs, yet these check valves are very small, simple, and cheap.
We Export in Listed Country UAE, Qatar, Saudi Arabia, Canada, Germany, Sri Lanka, Bangladesh, Malaysia, Kenya, Indonesia, South Korea, Oman, Ghana, Singapore, Sudan, Nigeria, Zamba, Mayanmar, Djibouti, Algeria, Kuwait, Nepal, South Africa, Tanzania, Italy, Jordan, Turkmenistan, Iraq, Guinea, Bahrain, Japan, China, Taiwan, Uganda
Body:1. Cast Iron
2. Ductile Iron
3. Cast Steel
4. Stainless SteelPIN: 1. Stainless SteelSEATS:     1. Stainless Steel  2. Bronze
Spring Loaded Disc Check Valves - Non Return Valve feature a wafer type, compact and rugged design Cast Carbon Steel (ASTM A 216 GR. WCB) or Stainless Steel (ASTM A 351 GR. CF8/CF8M/CF3/CF3M/SS304/SS316/SS304L/SS316L) construction and are suitable for any process liquid, air, gas, steam etc

The Single Disc Check Valve (Wafer Type Single Disc Check Valve) consists of four main components: the body, a disc, a star guide and a spring. The Disc check valves are opened by the pressure of fluid and closed through compression spring as soon as flow stops thus preventing reverse flow.

The design of Wafer Design, Sandwich Type, Flangeless Single Disc Spring Loaded Check Valves allows them to be installed between any flanges of different standard and in any position; including vertical pipelines where the fluid flows downwards.

 

Salient Features of Disc Check Valve

• Investment Casting Body Construction
• Compact & Rugged Design
• Stronger, Lighter and Smaller than Conventional Swing Check Valve, 
  Hence Less Expensive to Install and Maintain
• Single Disc Type
• Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines
• Easy To Installation between Two Pipe Flanges
• Metal To Metal or Soft Seat option
• Maintenance Free Design
• Zero Leakage (In Soft Seat)
• Full Port Opening
• Less Pressure Drop
• Wafer, Flangeless, Sandwich Type
• Shorter Length, Required minimum space
• Offer any 3rd Party or Client Inspection

Product Details:

·         100 NM to 2400 NM

·         Basic version with the integral starter with modulating controller remote sensor operated intelligent series.

·         All joints on the housing are armed with water proofing seal IP 67 which is appropriate for use in the outdoor environment.

·         Thermo switches embedded in a motor winding of actuator will disconnect motor on over heating and protect for burning.

·         It adopts gear group with small modules fitting which can indicate the accurate position of actuators.

·         Long valve life via soft start up and gradual closing.

·         Torque switch will stop the motor automatically in case of over torque in the valve.

·         Easy mounting, transmitting with equilibrium and low failure rate.

Additional Information:

• Production Capacity: 20

Product Details:

The raw materials we use to make butterfly valves are of the highest quality to ensure their performance and durability. We offer Electric Actuator Operated UPVC Butterfly Valve, Aluminum Body Butterfly Valve, Extended Stem Butterfly Valve & Double offset disc Butterfly Valve. To browse all models check our category section.

Available Power Supply : 110V AC / 415V AC / 380V AC / 24V DC


Available Size : 12”

Additional Information:

• Production Capacity: 10

Product Details:

Motorised Sluice Valve With Electrical ActuatorElectric valve actuators  control the opening and closing of valves. With a motor drive that provides torque to operate the valve, these actuators are frequently used on multi-turn valves such as gate or globe and also on ball, plug and other quarter-turn valves

Additional Information:

• Production Capacity: 10

Product Details:

Features

• Precise Regulating with High flow capacity
• Large type of trim Top operating design for various duty conditions
• In line Repairable Design for easy maintenance
• Tight closure even in extreme operating conditions
• Multi action type Actuators to meet different application
• High flow capacity & range ability
• Top operating for easy trim inspection without disturbing the lined.
• Designed and tested to deliver 100% performance under specified operating conditions
• Wide selection of actuators to meet most requirements
• Soft Seating
• Manual Over Ride available
• MOC : WCB, CF8, CF8M, CF3M etc.

 

Product Details:

 

This general purpose soft seated lug type butterfly valve has a fully rybber lined single piece body with a centric disc construction and is available in wafer lugged style body pattern to ensure precise

 

Additional Information:

• Production Capacity: 10

Product Details:

Diaphragm valve, which was originally designed for use in non-hygienic applications, has now undergone design changes for extensive use in bio-pharmaceutical industry. We offer high quality TC End Diaphragm valves that are suitable for use in pharmaceutical, water treatment and other industries. The most prominent features of the valves supplied by us are listed below.

• Crafted from carefully chosen materials capable of withstanding sanitizing and sterilizing methods.
• Available in various operation modes including manual handle operation, gear operation, pneumatic air operation and electric operation.
• Come with an assurance of error free design and great precision for maximum efficiency.

Additional Information:

• Production Capacity: 20

Product Details:

A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate. Gate valves are used to isolate specific areas of the water supply network during maintenance, repair works, new installations, as well as to reroute water flow throughout the pipeline.

A gate valve has a simple design and can be applied in many low pressure-drop services, which makes it one of the most common valves in use today. Gate valves are designed as full-port valves. This means that the valve port is of the same size as the inner diameter of the connecting pipe. Full-bore gate valve passes the fluid flow without any obstructions to a flow and do not cause a pressure drop in a pipeline. This also allows to clean the pipe using a cleaning pig.
Kyrgyzstan, Nepal, Bhutan, Laos, Myanmar, Thailand, Vietnam, Spratley, Brunei, Malaysia, Combodia, Singapore, Indonesia, Est Timor, Australia, Niue, Samoa, Wallis and futuna, Fiji, New Caledonia, Samoa, Tokelau, Kiribati, Tuvalu, Solomon, Nauru, Papua New Gunea, Micronesia, Palau, Micronesia, Guam, Marshall, Northern Maniana, Philippines, Taiwan, South Korea, North Korea, Japan, Sri Lanka, Maldives, Afghanistan, Uzbekistan, Tajikistan, Kazakhstan, Mongolia, Russia.
Indonesia, Malaysia, South Africa, Ghana, Nigeria, Senegal, Egypt, Turkey, Benin, Burkina Faso, Cape Verde, Cote d''Ivoire (Ivory Coast), Gambiav, Guinea, Guinea-Bissau, Liberia, Mali, Mauritania, Niger, Saint Helena, Sierra Leone, Sao Tome and Principe Togo, Algeria, Libya, Morocco, Tunisia, South Sudan, Sudan, Western Sahara (Territory), Jordan, Bahrain, Iraq, Iran, Qatar, Kuwait, Syria, Israel, Cyprus, Lebanon, Canada

Manufacturers and Exporters of Industrial Valves, Diaphragm Valve (Weir, Straight Through, Rubber Lined, Sanitary, Pneumatic), Ball Valve (Single, Two, Three, Piece, 3 Way, 4 Way, Pneumatic, Wafer), Butterfly Valve (Wafer, Lug, Double Flanged, PTFE Seat, Triple Offset, Electric Pneumatic), Plug Valve (Lubricated Taper, PTFE Sleeved, Inverted, 3 Way and 4 Way), Gate Valve (Stainless Steel, Forged Steel), Globe Valve (Stainless Steel, DIN ND, Control, Forged), Check Valve (Swing, Lift, Dual Plate, Disc, Wafer, Forged Steel), Knife Gate Valve (Stainless Steel, Pneumatic, Square Port), Double Window Sight Flow Indicator, Full View Tubular Sight Glass, Strainers or Filters (Y Type, Basket, Duplex, Pot), PTFE Lined Valve, PFA Lined Valve, PVDF Lined Valve, PP Lined Valve, PTFE Lined Pipe, PTFE Lined Pipe Fittings, Isotactic Polypropylene Valve, PP Valve, PVDF Valve, HDPE Valve, Ahmedabad, Australia, Argentina, Austria, Bahrain, Belgium, Bangalore, Bulgaria, Canada, Chennai, China, Chile, Colombia, Czech Republic, Coimbatore, Dammam, Denmark, Delhi, Egypt, Europe, France, Finland, Gujarat, Germany, Greece, Hubli, Hyderabad, Hong Kong, Houston, Hungary, Italy, India, Indonesia, Iran, Israel, Ireland, Jordan, Jalandhar, Japan, Jaipur, Kuwait,  Korea, Kolkata, Karnataka, Kerala, KSA Saudi Arabia, Lebanon, Ludhiana, London, Louisiana, Lithuania, Middle East, Mexico, Maharashtra, Mumbai, Mysore, Massachusetts, Malaysia, New Zealand, Navi Mumbai, Nagpur, Nashik, Nigeria, Netherlands, Norway, Oman, Oklahoma, Ontario, Ohio, Pennsylvania, Pune, Poland, Philippines, Puerto Rico, Portugal, Poland, Peru, Qatar, Rajkot, Rabale, Russia, Romania, Russia, Syria, Serbia, Switzerland, Sweden, Spain, South Africa, Singapore, Satara, South Korea, Texas, Thailand, Tamil Nadu, Taiwan, Turkey, Trichy, United States of America, USA, United Arab Emirates, USSR, UAE, United Kingdom, UK, Ukraine, Venezuela, Vietnam, Vasai, Yemen, Zambia.

Additional Information:

• Production Capacity: 21000
• Delivery Time: Standard
• Packaging Details: Sea & Airworthy Gate valves are normally operated by a handwheel, a valve T-key (wrench) or an actuator. The wheel is attached to a valve stem and transfers rotational energy to it. During the gate valve opening, the rotation of the handwheel turns the threads of the gate stem into the gate and vice versa for closing. This energy moves the gate valve wedge downwards or upwards. In underground gate valve installations, an extension spindle is attached, which allows operation without direct access to the valve itself. Generally, gate valves are installed in the areas of a pipeline where they will longer remain open or closed, as they generally require sometime to switch between these two positions. However, when the valve needs to be operated quite often or even remotely, motorized gate valves are used (i.e. equipped with an electric actuator). In rising stem gate valves, the stem position tells whether a gate valve is open (outside of the valve body) or closed. In non-rising stem gate valves, it is not easy to determine if the gate valve is fully open, closed or somewhere in between at first sight. A marker of the closing direction (cc for clockwise closing, acc for anti-clockwise closing) can be helpful to determine the position of the wedge. A position indicator is a special device, which is mounted on the gate valve stem and helps a user quickly determine a position of the gate valve. Most of the gate valves close by a clockwise direction, however, in some countries, utilities use anti-clockwise closing gate valves. Hawle produces both versions of gate valves, which allows meeting local standards of such countries as Australia or New Zealand. Since gate valves are isolation valves, they must be used either in the ¿¿¿fully open¿¿¿ or ¿¿¿fully closed¿¿¿ position and must not be deployed to regulate the water flow. Why a gate valve is not suitable for throttling a flow? When throttling a gate valve, turbulent flow rates through the valve body can cause vibration and cav

Product Details:

approvals                         : design (tuv) / iso 9001:2008 / ce / iec

characteristic                : on - off type / modulating type

travel angle                     : 90 degree

indicator                            : continuous position indicator

supply                                  : 220v ac , 50 hz

body material                   : aluminum alloy

ambient temperature    : -10°c ~ 55°c

motor insulation           : class f

protection class           : ip 67 – weather proof

limit switch                       : 1 no + 1 no output of 220v ac

position on power fail                : stay put

manual override             : provided

Additional Information:

• Production Capacity: 20

Product Details:

Motorised Gate Valve With Electrical ActuatorElectric gate valve refers to  the linear movement of the electric gate valve actuator through electric voltage and signal control to open or close the gate valve. Electric gate valves can help you achieve the purpose of remote control, help you reduce labor costs, and improve production efficiency

Additional Information:

• Production Capacity: 20

Product Details:

The two primary types of actuators are commonly referred to as rotary and linear. Rotary actuators turn an object by a few degrees in a circular motion—which could be limited or an infinite number. Linear actuators, on the other hand, move an object along a straight line, generally in back and forth motion.

Additional Information:

• Production Capacity: 20

Product Details:

Motorised Multi Louver Damper With Electrical Actuator Dampers and louvers  control the flow of air in a process system or enclosed area. Dampers are usually actuated or manually-adjustable for flow control. They can modulate gas or air flow, detour flow into alternative systems, or isolate a process for inspection and repair.

Additional Information:

• Production Capacity: 10

Product Details:

Full bore diaphragm valves are primarily used in the fields of water and waste water treatment, mining, the mineral, paper and cellulose processing industry, the chemical industry or at power stations and steelworks. Their virtually full bore gives them an advantage over other conventional shut-off valves, particularly when working with viscous liquids such as slurry and liquids with a high solid or fibre content. A metal valve body with hard rubber lining can be used when processing abrasive media such as surface water with sand content or milk of lime for water treatment. The entire medium wetted part is therefore protected by the lining, which prevents micro-pitting (hydroabrasion).

Product Details:

Pneumatic Diaphragm Actuator Operated Rubber Lined Diaphargm Valve Flanged all over the world.For Waste & Water Treatment Plants, Filtration Plants, Chlorination Plants, etc....

·         The Diaphragm Valve is essentially a simple pinch clamp, closed by pressing a flexible diaphragm against transverse weir, when fully closed, the diaphragm seats against the weir providing a leak tight closure.

·         The diaphragm valves are recommended for handling sticky and viscous fluids, slurries andhighly corrosive and hazardous and other hard to handle mediums or where tight closure is prime factor, It is the most ideal valve to handle fluids that require high purity and should remain free from contamination.

·         The diaphragm valve is simple pinch type valve and of low pressure type because of large area of diaphragm and is extensively used for both on/off and throttling service and finds its application in Water treatment plants, Filtration plants, Chlorination Plants etc......

Additional Information:

• Production Capacity: 10

Product Details:

The most dependable forged steel Ball Valves in the industry. Our products are manufactured and tested in accordance with respective API, ASME, and ANSI standards. With features such as double block and bleed capabilities, secondary sealant injections, and spring energized self relieving seats

Additional Information:

• Production Capacity: 10

Product Details:

Pneumatic Cylinder Operated Low Temperature & High Temperature Control Valve to our clients. We are a renowned company, engaged in offering an extensive gamut of Cylinder Operated Control Valve

Additional Information:

• Production Capacity: 10

Product Details:

Good quality products, excellent Customer service, and on-time delivery are the reason we grow continuously in the industry. we manufacture 3 Piece Design Extended Shaft Floating Ball Valve for our client as per demand we used advanced machine to manufacture them.

Additional Information:

• Production Capacity: 20

Product Details:

2/2 Way Dust Collector Pulse Valve, which is extremely praised in the market. Owing to high demand, professionals make these products in varied patterns.threaded ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet.

Suitable For
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, Cartridge filters, Envelope filters, Ceramic filters & Sintered metal fibre filters.

Additional Information:

• Production Capacity: 50

Product Details:

Vertical check valves are also known as spring check valves since a spring is used to keep the disc against the seat. The valve is held shut by the spring until a sufficient amount of pressure is applied to push the spring back and open the valve. Pressure keeps the valve open and the spring compressed.

Product Details:

The "AIRA 4MATIC" side entry ball valve is an exemplary product that showcases advanced engineering and performance excellence. With its innovative design and robust construction, it offers numerous benefits and advantages for a wide range of industrial applications. Here's an overview of its key features and benefits:
Features and Benefits:
Side Entry Design: The valve's side entry configuration allows easy access and maintenance of the ball and stem without requiring valve removal. This design facilitates inspections, repairs, and maintenance tasks, saving time and effort.
Full Bore Construction: The "AIRA 4MATIC" employs a full bore layout, matching the internal diameter of the pipeline. This design minimizes pressure drop, ensuring efficient fluid flow with fewer restrictions.
Robust Construction: Crafted from premium materials like stainless steel or durable alloys, the valve offers exceptional resilience and corrosion resistance. It's suitable for challenging operating conditions, ensuring a prolonged service life.
Blowout-Proof Stem: The blowout-proof stem design prevents stem ejection even under high-pressure conditions. This feature enhances operational safety, especially in demanding environments.
Bi-directional Flow: The valve supports bi-directional flow, accommodating fluid movement in both directions. This versatility makes it well-suited for applications requiring adaptable flow control.
Quarter Turn Operation: The valve's quarter-turn operation enables quick and efficient opening and closing through a 90-degree handle rotation. This swift maneuver minimizes downtime and enhances operational efficiency.
Fire-Safe Design: Some versions of the "AIRA 4MATIC" are designed to be fire-safe, ensuring the valve's functionality during fire incidents. This safety feature is crucial for critical installations.
Diverse End Connections: The valve is available with a variety of end connections, including flanged, threaded, and welded terminations. This flexibility allows seamless integration with existing pipelines.
Actuator Compatibility: The "AIRA 4MATIC" is compatible with various actuator types, including pneumatic, electric, and hydraulic actuators. This compatibility enables remote and automated valve control tailored to specific industrial needs.
Manufacturer:
The "AIRA 4MATIC" is produced by a reputable valve manufacturer known for its high-quality and reliable products. This manufacturer specializes in a wide range of industrial valves, including ball valves, butterfly valves, gate valves, globe valves, and more. Their expertise spans industries such as oil and gas, petrochemicals, power generation, water treatment, and general industry.
Note of Caution:
For the most up-to-date and accurate information about the "AIRA 4MATIC" side entry ball valve and its manufacturer, it's recommended to visit the manufacturer's official website or engage with their authorized representatives.
Varieties of Ball Valves:
In addition to the "AIRA 4MATIC," there are various other types of ball valves available, each with distinct designs and advantages, including:
Floating Ball ValveTrunnion Ball ValveTop Entry Ball ValveMulti-Port Ball ValveCavity Filler Ball ValveV-Port Ball ValveThree-Piece Ball ValveFull Port Ball ValveReduced Port Ball ValveHigh-Pressure Ball ValveCryogenic Ball Valve.Geographical Presence:
The legacy of the "AIRA 4MATIC" spans across multiple countries in the Middle East and North Africa (MENA) region, including the United Arab Emirates, Saudi Arabia, Qatar, Kuwait, Bahrain, Oman, Yemen, Iraq, Jordan, Lebanon, Syria, Palestine, Egypt, Libya, Tunisia, Algeria, Morocco, Afghanistan, Iran, Israel, and Turkey. Cities such as Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah, and Fujairah bear witness to the impact of the "AIRA 4MATIC" valve's excellence.

Product Details:

Keeping in mind evolving requirements of our respected clients, we are offering a premium quality range of Pneumatic Diaphragm Actuator.

Additional Information:

• Production Capacity: 10

Product Details:

Balancing valves and double regulating valves are essential components in plumbing and HVAC systems, each serving distinct but crucial functions. Here's an in-depth explanation of both:
Balancing Valve: Maximizing Flow Control and Efficiency
Balancing valves are designed to ensure precise control and balance of fluid flow within a system. They play a pivotal role in maintaining optimal performance and efficiency in various applications, particularly in HVAC (Heating, Ventilation, and Air Conditioning) and plumbing systems.
Key Features and Functions of Balancing Valves:
Flow Control: Balancing valves enable fine-tuned adjustments to the flow rate of liquids or gases, ensuring that each branch or zone within a system receives the desired amount of fluid. This is vital for maintaining consistent temperatures in HVAC systems and preventing issues like uneven heating or cooling.
Types of Balancing Valves:
Manual Balancing Valves: These valves feature a hand-operated handle or screw that allows users to manually regulate the flow. While cost-effective, they require regular monitoring and adjustment.Automatic Balancing Valves: Equipped with mechanical or electronic components, these valves adjust flow automatically to maintain preset flow rates. They offer precision and demand less maintenance.Variable Flow Valves: These valves adapt flow based on changing conditions, optimizing system performance and energy efficiency.Applications:
HVAC Systems: Balancing valves are indispensable in HVAC systems to distribute heated or cooled air evenly throughout buildings. Proper balance ensures comfort and minimizes energy consumption.Plumbing Systems: In plumbing, balancing valves maintain consistent water pressure across various fixtures and areas within a building, preventing issues like low water pressure or temperature fluctuations.Benefits of Balancing Valves:
Energy Efficiency: Well-balanced HVAC systems consume less energy by preventing overwork in certain zones and underutilization in others.Comfort: Even distribution of air or water ensures consistent comfort levels throughout a building.Maintenance Reduction: Balancing valves reduce wear and tear on system components, leading to lower maintenance costs.Double Regulating Valve: Optimizing Flow and Pressure
Double regulating valves (DRV), also known as differential pressure control valves, are specialized valves used primarily in HVAC systems to precisely regulate flow and control pressure differentials.
Key Features and Functions of Double Regulating Valves:
Flow Regulation: DRV valves enable precise adjustment of flow rates, allowing HVAC professionals to fine-tune the flow of water or other fluids within the system. This is crucial for maintaining the desired conditions in heating or cooling processes.
Pressure Differential Control: These valves help maintain a consistent pressure difference between the inlet and outlet of system components, such as coils or heat exchangers. This ensures that equipment operates efficiently and within specified parameters.
Usage in HVAC: DRV valves are commonly employed in hydronic systems, where they play a vital role in optimizing the flow of hot or cold water to radiators, coils, or fan coil units. By controlling flow and pressure differentials, DRV valves contribute to energy savings and comfort.
In summary, balancing valves and double regulating valves are indispensable components in plumbing and HVAC systems. Balancing valves focus on maintaining overall flow balance within a system, while double regulating valves specialize in precise flow and pressure control, particularly in hydronic HVAC applications. Both types of valves are instrumental in achieving energy efficiency, comfort, and system reliability.