Aira 4matic Global Valve Automation Private Limited

• The 4Matic Make Pilot Operated Pressure Reducing Valve is designed for applications where the reduction of high inlet pressures to a safe and stable outlet pressure is required. The pilot assembly reacts to changes in downstream pressure allowing the main valve to modulate between the closed and open position ensuring a constant downstream set pressure. Once the downstream pressure reaches the pilot setting, the main valve will seal shut preventing damage downstream. Pressure regulation is not dependent upon flow rate, resulting in minimal pressure loss through the valve.
• Like direct acting pressure reducing valves, these valves are self-powered. Pilot operation provides accurate control under large load change conditions. Available in iron, cast steel and stainless steel in sizes 1/2" to 8".

The 4Matic Automatic Control Valve is a hydraulically operated valve. Pressure Reducing 4Matic  provides steady downstream pressure and allows high flow rates. Standard features ease maintenance and repair and provide the lowest total cost of ownership. The PRV 4Matic pilot assembly allows the main valve to modulate between closed and open for constant downstream pressure and automatically seals shut after reaching the pilot set to prevent possible downstream damage. This Water Pressure reducing valve's internal and external epoxy coating offers corrosion-resistance, and the isolation valves and pressure gauges provide easy, cost-effective maintenance and repairs for the lowest total cost of ownership.

#PressureRegulators

#PressureControlValves

#PressureReducers

#FlowControlValves

#PressureLimitingValves

#PressureReductionValves

#RegulatingPressureValves

#FlowRestrictionValves

#PressureModulationValves

#PilotOperatedRegulatorValve

#BackPressureRegulator

#ReliefValve

#ReducingValve

#PressureReducingRegulator

#PressureReliefRegulator

#DiaphragmControlledRegulator

#SpringLoadedRegulator

#Pilot-ControlledPressureRegulatorValve

#Pilot-OperatedPressureControlValve

#Pilot-ActuatedRegulatingValve

#Pilot-OperatedReliefValve

#Pilot-ControlledRegulatorValve

• Pipe breakage because of high pressure can be prevented through the use of Pressure Reducing Valve.
• Through the installation of Pressure Reducing Valve in the water supply pipeline, the outlet pressure is maintained, regardless of the different inlet pressure.
• High grade materials and robust design, provides durability to the PRV.
• Adaptability as far as sealing options are concerned. NBR, EPDM other material on request.
• Corrosion resistance is enhanced due to Epoxy Coating.

Modulating Pressure Reducing Valve is an advanced type of pressure control valve designed to regulate downstream pressure with high accuracy and stability. It consists of a main valve and a pilot valve, where the pilot valve controls the operation of the main valve.

• The pilot valve senses the downstream pressure and modulates the main valve to maintain a preset pressure.
• When downstream pressure drops below the set value, the pilot valve opens, allowing the main valve to open and increase flow.
• When downstream pressure rises, the pilot valve restricts flow, causing the main valve to close gradually.

✔ Precise Pressure Regulation – Ensures consistent downstream pressure.
✔ High Flow Capacity – Suitable for large flow applications.
✔ Energy Efficient – Reduces pressure loss and enhances system performance.
✔ Self-Actuating – Operates without external power sources.

✅ Steam systems
✅ Water distribution
✅ Oil & gas pipelines
✅ Industrial air and gas systems

#4maticvalves #valveworld

#valvetechnology #pressurereducingvalve

#watervalves #prv #plumbing

#plumbers

The body and cover plus interiorseat and diaphragm/stem assembly, which is the onlymoving part in the main valve.
Variable volume cover chamberA synthetic rubber/nylon diaphragm, of FDA approvedmaterials, is assembled between the valve body andcover. This creates a sealed chamber into which linefluid and pressure is introduced. Varying the amount ofpressure   accurately   positions   the   stem   assembly   toopen, close or modulate the valve as required.Precise alignmentand stable throttlingA cover bearing and integral seat bearing guide thestem   assembly   for   precise   alignment   with   the   seat.Coupled with the quad seal retainer plate, this align-ment assures progressive opening/closing flows, stablethrottling, low friction operation and positive closure.Drip tight sealWatts ACV leads the automatic valve industry by beingthe first to incorporate the dynamic quad seal. The seat,retained   on   3   1/2+   sides,   provides   positive   closurewhile eliminating the need to “bite” into the seal, addingyears to the valve’s life. Each quad seal has two usablesides.

Fused epoxy prolongs lifeThis coating is applied under rigorous preparation andapplication standards. It is non-porous, improving theflow coefficiency of the valve and effectively sealing thecasting from interaction with the controlled liquid. Thecoating   also   protects   the   valve   from   environmentalattack. The finish prevents mineral buildup and rust (amajor factor in control valve failure), simplifies mainte-nance, and prolongs the life of the valve.Multiple function performanceBy varying the control/piping arrangement, the WattsACV   is   able   to   perform   a   diversity   of   functions   andapplications. Multiple functions performed by a singlevalve can result in added system protection and lowercost to the user.Simplified MaintenanceThe main valve and pilot system can be serviced with-out removing the valve from the line.Right valve, Right place, Right timeWatts ACV is committed to providing you with correctfunction   and   material   to   meet   your   applicationrequirements and prides itself with accurate, calculateddelivery schedules.

Electrical Actuator Smart Flow Control Valve Control Valve is a Globe Design Pilot Operated Diaphragm Actuated Valve.
An Electric Actuator operated Ball Valve acts as a Pilot valve, These valve is designed specifically for applications where remote control of valve function is preferred. They function as an On/Off valve and as they are pilot operated there Open and Close in Seconds. This Valve Helps the User to On/Off the valve with PLC panel.

Our technicians will install and set your PRV to the pressure for which the sprinkler valves and heads are designed and rated. Adjusted pressure will reduce "misting," allowing droplets of water to form. These droplets will land on your landscape instead of misting into the atmosphere.

·         Your system will be more efficient and the reduced pressure will extend the life
of all the components.

·         Please note that depending on demand, city water pressure can fluctuate in any given area.

Additional Information:

·         Item Code: IRRIFATIONPRV

·         Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

·         Port of Dispatch: AHMEDABAD

·         Production Capacity: 500 /1

·         Delivery Time: DEPEND ON QUONTITY

Features and Benefits

• Line pressure driven – Independent operation
• Solenoid controlled
• Low power consumption
• Wide ranges of pressures and voltages
• Normally Open, Normally Closed or Last Position
• In-line serviceable – Easy maintenance
• Double chamber design
• Moderated valve reaction
• Protected diaphragm
• Flexible design – Easy addition of features
• Variety of accessories – Perfect mission matching
• Y or angle, wide body – Minimized pressure loss
• Semi-straight flow – Non-turbulent flow
• Stainless Steel raised seat – Cavitation damage resistant
• Obstacle free, full bore – Uncompromising reliability
• V-Port Throttling Plug – Low flow stability

• Advantages of ACV Float Valve:

Prevents Overflows : The valve ensures that the water tank does not overflow by closing the valve once the set water level is reached. This helps in preventing wastage and damage to the tank system.

Low Maintenance : The simple design of ACV float valves makes them easy to maintain. They require minimal upkeep, saving both time and money over the years.

Water Conservation : By halting the water supply once the tank is full, it ensures that no excess water is wasted. This feature is ideal for systems in areas where water conservation is a priority.

Cost-Efficient : ACV float valves are a cost-effective solution as they are relatively inexpensive to purchase and install compared to more complex water control systems. Their longevity and low maintenance also contribute to cost savings in the long term.

Prevents Pump Damage : In systems that involve pumps, the float valve ensures that the pump does not run dry, which could otherwise cause damage. The valve ensures sufficient water in the system before the pump is activated.

Energy Efficiency : Since the valve only allows water to flow when needed, it helps in reducing energy usage in water pumping systems, resulting in lower electricity costs over time.

Versatile Usage : ACV float valves are used in a variety of applications, from household water tanks to large industrial systems. Their adaptability makes them suitable for various water management needs.

Improved System Control : With its automated operation, the valve enhances overall system efficiency by providing precise control over water levels, which is crucial in maintaining proper functioning of the system.

Durability : Constructed from high-quality materials like stainless steel or cast iron, ACV float valves are built to last, offering long-term reliability even under harsh conditions.

• The valve operates automatically, requiring no manual intervention. Once installed, it regulates the water level without the need for constant monitoring, saving time and effort. 

• It helps in preventing water wastage by stopping the inflow once the tank reaches its desired level. This is especially beneficial in areas where water is a limited resource.

• The float valve ensures that the water tank doesn't overflow by shutting off the water supply when the tank is full. This is crucial for maintaining the integrity of the tank and preventing potential flooding.

• By controlling the flow of water efficiently, the float valve can reduce the need for pumping water continuously. This leads to energy savings in pumping systems.

• Float valves have a simple design that makes them easy to maintain and operate. They are typically made from durable materials like brass, stainless steel, or high-quality plastic, ensuring long-lasting use.

• These valves are relatively inexpensive compared to more complex water control systems. The initial installation cost is low, and they require minimal maintenance.

• Float valves are used in various settings, such as water tanks, irrigation systems, cooling towers, and industrial water systems, making them versatile for different needs.

• In systems where a pump is involved, the float valve ensures that the pump doesn't run dry by preventing it from operating when the water level is too low.

• Pilot-operated design for automatic control

• Diaphragm actuated for smooth operation

• No electricity required – fully self-operating

• WCB (Cast Steel) body with long life and durability

• Flanged ends for easy installation

• Leak-proof and low maintenance